12V RV Fridge Ventilation Cooling Fan 5.5 (140mm), Custom Mounts For American RV Side Vents, Adjustable Temperature Settings, High-Tech Remote With Manual/Auto Modes, Waterproof

excellent product the only thing is the cables are a little short for my rv

Did not add anything to the performance of my refrigerator…

I blew out the control unit by plugging into 120. Although it was completely my fault the company was extremely understanding and worked with me to my satisfaction.

Customer service was excellent product works as described..,. Brought down temp refrigerator in RV cut power consumption by half.

This is a well designed, easy to install double fan kit designed for US RVs. It is not fuse protected, so I suggest an inline fuse on the positive wire...I fused it with a two amp fuse. Adds a real strong airflow out the top vent. You could make your own...but why!

Have used other Beech Lane products and been happy with the results but this product ended that trend. To begin with, I paid a new price but item I received appeared to be a used product (controlling box had tape residue over the back and was dirty). On my travel trailer, I previously installed a name brand fan at the top exhaust duct so my review is in comparison to that. This one was installed on the access door/ vent. Did not fit my Dometic (2021) door and required modification, kind of to be expected that so no biggie. Air movement was comparable to the name brand unit. Noise was louder than the name brand unit, although not bad enough to be an issue or annoy a neighbor. Wires did not match wire colors in installation paperwork. Controller box was, in my opinion, ridiculously large. Button layout was the same as name brand unit but larger. Controller box can only mount via double sided tape which is provided but falls after each drive. The name brand unit, which was smaller, had a screw mounted system and has never fallen. On my unit, only way to turn it off when in automatic mode is to turn it to manual mode and then off as name brand unit could just turn it off directly. Not a horrible item but in hindsight, I would pay the little extra for name brand unit. I would have returned this but I received this a day before a trip we were taking to a hot climate so I moved forward with installing it.

I installed the fan assembly! It was 1/2 to thick to fit the opening! So I used my Bridgeport mill to shave the cover assembly down 3/4 so the fan assembly would fit the area intended! With a little ingenuity everything worked!

the adhesive pads that came with were dried out . need to purchase new 3m sticky pads . locally

I have a Norcold N145 refrigerator in my RV which works fine if the outside temperature and humidity are relatively low. However, when the temperature and/or humidity increases, the performance decreases.

Seems like a good product. Instructions are a little lacking, but its fairly simple to figure everything out so not a huge deal. I dont know how similar various intimations are, but in our Coachmen Chaparral 274BH with the Norcold 1210, there is NOT enough clearance on the top vent to install these fans... so I had to flip the fans and install on the bottom vent instead. Hope they help!!