2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
JERRY
> 3 dayDid the trick. Had one room in the house far from the router that had poor signal. At times neighbors WiFi would come in stronger and knock the computer off. Bought this per recommendation and it works well. Easy to set up.
-
anTTraXX
> 3 dayhaben uns das kabel gekauft das es doch recht preiswert ist und in schwarz ein dfach nur geil aussieht mit den roten Klipsen.
-
PATRICIA
> 3 dayLove this little device. Now i get the same speed in my living room as i do right at the router in my computer room. I would recommend this easy to setup device over and over again.
-
Tobias M.
> 3 dayKann ich weiterempfehlen. Versand schnell und Kabel funktioniert gut!
-
fotohobbier
> 3 daySieht schick aus. funktioniert einwandfrei hab es zwischen switch und router... kabel ist sehr gut mehr kann ich nicht sagen
-
noxxic
Greater than one weekDie Kabel machen was sie sollen und wenn man die Kabel in Kurven die Treppe runter verlegt werden die Daten schneller durch die Fliehkräfte ;)
-
jing que
> 3 dayThe signal strength is also much better. If you need a powerful extender with maximum possible speed, I highly recommend you spend the money on this rather than your bottom line N300 type extender.
-
CHRISTINE
> 3 dayCompetitively priced, timely delivery, packaged well, excellent quality and a great fit.Very goodBig help in the side of the house away from router and modem
-
MARGARET
> 3 dayLove it. Well worth the price. It was easy to setup and I am finally able to stream movies even outside in the back yard. Before buying this, I thought I was going to have to purchased increased speed from the provider; something that would have been a similar price but monthly. I am very happy with this purchase.
-
Christian Feege
> 3 dayGute Verarbeitung und erfüllt zu 100% seinen Zweck ;-) Kann ich nur weiter empfehlen.besunders gut finde ich den knickschutz am Stecker.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
