4 Inch 10 Watt External CB Radio Speaker - Workman 711-SX

the mounting bracket is very flimsy along with the screws that go into the speaker itself ,the audio is just OK nothing special.

Inexpensive but a quality speaker. Buy it. Better audio spectrum reproduction than smaller speakers.

I bought this because i was using a cobra that i bought from the truck stop and needed to replace. The President name has been around for years, so i went with it. It is a good speaker for sure but i dont hear much difference from the cobra.

I bought this because i was using a cobra that i bought from the truck stop and needed to replace. The President name has been around for years, so i went with it. It is a good speaker for sure but i dont hear much difference from the cobra.

This speaker doesn’t come with 10 ft cable, actually only 7 ft. Meaning way too short than advertised. Quality audio just good enough compared with built in speaker from the rig.

Inexpensive but a quality speaker. Buy it. Better audio spectrum reproduction than smaller speakers.

the mounting bracket is very flimsy along with the screws that go into the speaker itself ,the audio is just OK nothing special.

It has good clear sound.

I used this to make a remote operating station with the face plate and microphone from my FT-891 at the end of a long extension made out of two cat5 cables. It works GREAT! Much much much much better than the internal speaker! Will make enough sound to rattle the windows if you turn it all the way up! That said, if you have an FT-891 and you want to use this speaker (or ANY external speaker) with the jack on the front panel, you MUST look at the back of the front panel and slide the little switch to the SP position. These radios ship with that switch in the PH position (PH means phones, as in headphones, and the audio output on that jack will be limited to protect your ears, SP means speakers, and the audio will NOT be limited)... Great well balanced quiet and non-crackly audio! Perfect for any type of voice communications use!!!

I used this to make a remote operating station with the face plate and microphone from my FT-891 at the end of a long extension made out of two cat5 cables. It works GREAT! Much much much much better than the internal speaker! Will make enough sound to rattle the windows if you turn it all the way up! That said, if you have an FT-891 and you want to use this speaker (or ANY external speaker) with the jack on the front panel, you MUST look at the back of the front panel and slide the little switch to the SP position. These radios ship with that switch in the PH position (PH means phones, as in headphones, and the audio output on that jack will be limited to protect your ears, SP means speakers, and the audio will NOT be limited)... Great well balanced quiet and non-crackly audio! Perfect for any type of voice communications use!!!