AC Infinity Controller 2, Fan Thermostat and Speed Controller, Controls AIRPLATE, MULTIFAN, USB Fans and Devices, for AV Cabinet Cooling

Bright and very readable display. Button placement works well. Power supply and temperature probe cables seem to be more than adequate length. Currently being used to control 2 AC Infinity AI-MPF120A 120mm USB Fans connected in series on a single USB output port. Soon to be used with an additional USB fan of another brand. Only thing Ive noticed is when using the AUTO mode that turns on fans at a certain set temperature threshold and turns off when a temperature 4° cooler is reached is that contrary to the operating instructions, the controller fan speed in the AUTO mode is full on. Even if fan speed is set at other speeds in ON mode, while in AUTO mode fan turns on at full speed. Second, in SMART mode the fan speed changes with every 2° degree increments approaching the set temperature.. for example, if set temperature is 77 then as temperature rises, @72 fan is off, @73 fan on at low speed, @75 fan on at medium speed, @77 (set temperature) fan on at full speed. So in SMART mode fan shuts off again @72. But, in AUTO mode, if set temperature is 77, @73 fan shuts off again after reaching 77. Just a slight difference in off temperatures. I also think the temperature probe may be 2 degrees high as compared with a laser thermometer. Lastly, the plastic template fits snuggly on the back. When tracing a line inside the template, youll need to cut your cabinet very carefully on the line or you will find yourself having to slightly enlarge the cut out. And the very nice brushed aluminum finish front bezel is attached with small screws that protrudes slightly further than your templates cut out on both left/right sides where attached to the black plastic body. This becomes very apparent when carefully removing the template. If you want the controller and screw heads to fit into the cabinet, you may want to mark the template indicating the screw placements on template before removing the template. After making the correctly sized cut out and drilling 4 bezel mounting screw holes, youll want to make additional small shallow notches for those screw heads on the side of the body.

Easy to setup. Quiet.

As advertised . Good product

This measures and controls my home theater equipment. This is a replacement for my original one that lasted 5 years. Works great and cools everything down when needed automatically. Would recommend this product.

I bought this over year ago to control the ac infinity airplate S5, still going on strong they turn on when the my ps4 starts warming up it stays at 85 degrees. I keep it in Smart mode so that the fan isnt alway running on high.

Excellent product

The fan output is around 3 volts for each usb which can hardly power the fans the lcd functions are super basic and glitchy not worth $5 in my opinion the mounting brackets dont fit my grow tent which is from the same company its a glorified thermometer with two phone chargers on the back i will not be returning this out of pure spite i will be gutting it and replacing all the electronics to suit my needs .. Total JUNK....

Not sure the temperature probe is all that accurate for the smart temperature settings, I should probably look up the buffer temperature zone that the device will turn itself off at because it will constantly run if put on smart setting. Works great controlling compatible fans and has helped significantly cool my entertainment system.

This thing has a beautiful finish, the buttons work great, and install is simple and straightforward if youre handy with a jig saw. Install for me was about 45 minutes (only because it was a tight space I couldnt get an electric jig). Has four settings: ON/OFF/AUTO/SMART and so far, SMART has been doing great at keeping the temp below the preset.

work all the money