ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Alex
> 24 hourparece que no pero da para bastantes usos unos 4 mas o menos
-
Kristin Jenkins
> 24 hour偽物があるぞコレは本物本物！とか書いてあると逆に偽物かと疑いますね
-
Pierre Leupold
> 24 hoursehr zu empfehlen, im Vergleich zu 0815 Ware sehr gute Leitfähigkeit, habe bei mir an allen möglichen Stellen die Wärmeleitpaste getauscht und einiges an Kühlung herausgeholt
-
Fernando h
> 24 hourbuena pasta, es pasta termica no hay mucho que decir
-
Corey E.
> 24 hourGreat product, just as described will buy again.
-
Ralf D.
> 24 hourWürde es wieder kaufen. Auch nach Monaten hält die Wärmeabfuhr. Und die Menge hält für sehr viel Anwendungen.
-
FranReist
> 24 hourFunciona perfectamente.
-
Shelley
> 24 hourA great product, only time will tell how the quality of grease inside holds up.
-
David Fry
> 24 hourDrops temp easy spread
-
S.Z
> 24 hourI ordered this product because I am in the middle of upgrading/refurbing all my familys laptops, as well as building my own PC. I have to say Im beyond impressed with the thermals Im getting in all the computers Ive put this product in so far, definitely a huge improvement. I have regularly seen a ten degree drop on average (usually more), both idle and under load. Mind you, the laptops havent been cleaned and had their thermal paste redone in several years, so my results are more drastic than most, but great product nonetheless. Comes with a spreader (but youre probably better off not using it to be honest), arrived before initial ETA. Highly recommend!
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
