ARCTIC MX-4 (8 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Hector M.
> 3 dayEn la publicidad dice que es la versión 2019 y envían la antigua versión. Tengan cuidado.
-
C Molina
> 3 dayBest too mide range paste. Used by lots as Go TO other mal paste.
-
David A.
> 3 dayWorks as it should
-
Samuele
Greater than one weekOttima pasta termica
-
Maxime
> 3 dayJe recommande
-
Philipp Käthner
> 3 dayVersand wie immer super schnell. Die Wärmeleitpaste ist gut verpackt und wie beschrieben. Meine PlayStation war durchgehend so laut, dass mir stets nach kurzer Zeit die Lust am Spielen verging. Selbst nach einer gründlichen Reinigung, brachte sie es auf durchschnittlich 80 Dezibel (direkt neben dem Gehäuse). Nach dem Auftragen der Wärmeleitpaste, welches ich mit der Anleitung eines YouTube Videos gemacht habe, brachte sie es lediglich auf 40 Dezibel, was aus einem Meter Entfernung nicht mehr wahrzunehmen ist. Ich hätte zuvor niemals mit einem soo guten Ergebnis gerechnet. Nun kann ich endlich wieder in RUHE spielen!
-
Melvin
> 3 dayAuf Empfehlung gekauft und bereue es nicht.
-
DarthJango
> 3 dayI use MX-4 for all my builds, always gives me good temps, will continue to use.
-
DannyTunz
> 3 dayPasta termica ottima, applicata per tenere a bada un fx-8300. Che dire, temperature in full load che non superano i 45 gradi. Merito anche del dissipatore forse, ma con la pasta vecchia stavo sopra i 55 gradi.
-
Dmytro
Greater than one weekUse it for a long. Always temperature of PC lower after change to this compound.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
