ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Emiel D.
> 3 dayNot much to say about it besides its good stuff.
-
Amy Gorczany
> 3 dayWorked great
-
Chance Rosenbaum
21-12-2024So far so good the temps are running cool and it was easy to use so works as advertized
-
Schildkrieger
Greater than one weekARCTIC MX-4 macht was sie soll (ASUS Rock Games)
-
Joseph K.
> 3 dayEasy to spread and runs cool
-
Ivan B.
> 3 dayfacile da installare e anche super performante!
-
Aaron
> 3 dayDecided to try this over a roll of thermal tape. Cold and cool running! After using this and a fan, my overcooked Raspberry Pi 3 B+ has yet to break 40°C, even after running for hours the average is 37-38C. Previously had a great heatsink but would break 65 then 70 then freeze or glitch my system in an hour. Expensive, but will add to any heatsink I install moving forward.
-
Guadalupe Gutkowski
> 3 dayI was having overheating issue with my 3 years old MSI GS70 6QE gaming laptop. After using aida64 extreme, I found out that my laptop is even throttling during the boot-up. When I stress tested my CPUs, I was hitting 40% thermal throttled. So i took matters in my own hands. I ordered this Arctic thermal paste, reapplied to the CPU and GPU heatsink and the results were AMAZING. Before, I was having more than 10 degree C temperatures difference between the cores, even after thermal throttling, temps goes up to 87 C. After i changed the paste, not only the core temperatures are 2-3 degrees apart, but the temperature also dropped about 15 C. Remember, this is without thermal throttling!!
-
TtvJessewFL
> 3 dayNot much u could screw up. Is as described.
-
Dan Stormont
> 3 dayVery high quality thermal paste. Really easy to apply. I bought this to replace the dried out thermal paste on a Samsung notebook I was repairing, but it would be great for any heat sink application. Ive used a lot of thermal compounds over the years (even on high power radar components), but this was the easiest to apply and the highest quality Ive ever used. The tube is just a standard syringe thats about half full, but that would be enough for a dozen laptops.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
