CK T3327GTM LaYZr Tungsten Electrode 3/32 x 7, 10 pack

It’s a good all purpose tungsten. I use it on an inverter tig welder. For dc and ac welding. Good arc starts even on lower amps. And it holds a good point on aluminium/aluminum ac welding. Better then the 2% lan.

High quality

I like how smooth the Arc start up is at low amps ,i noticed right away so ill be buying more when i need it

Let me first say that I am no expert TIG welder, but Ive tried many different types of tungsten. This will be all I use moving forward. Not that the others were bad, but this one does everything better. Doesnt split, easy to grind, doesnt discolor, and makes a very clean arc. CK worldwide has done it again with another Better than the rest product!

I just did some experimenting with my 3/32 when I first got them to see if there was a noticeable difference to the ceriated and lanthanated that I use for steel and aluminum, respectively. Aluminum was first. I ground a nice sharp point for my inverter and ran a few 4043 beads on 1/4 6061. The standout difference I noticed was after several rods, there was no splitting on the very tip, and very little ball formation on the point even running at 30% EP. No spitting either, though it was a short session and I dont get much from the La electrodes either. During the session, being an old shaky guy, I duffed the electrode a few times, but it shook it off like a champ and I kept on going. Then a fly flew into my arc and exploded carbon all over. same result, just kept going. End of session a small sphere had formed but little else and didnt have to re-sharpen once. Then on to steel. I put a nice slender point on the electrode and ran some beads on different thicknesses from .040 to 1/2 steel and some stainless. The several rods later, the point looked the same as when I started. It stayed clean and sharp. Further, to test the low amperage behavior, I welded some rod remnants together. My machine has a hard start, so it takes bit of control to stick an .040 rod together. All went well and Im really considering putting my La and Ce on the shelf and just working with these. Really happy with them and will be getting some 1/16

Absolute favorite

I love this product, but I dont understand how 3 week mystery shipping with 0 tracking is acceptable. Will be pursuing other products because CK is such a slow drop shipper.

Welds everything with no problems.

Most TIG welders already understand, if it comes through CK Worldwide then it will be quality product... but all my expectations for this tungsten were blown out of the water when I found out just how versatile this multi mix is. It can do anything you need it to do. Literally any metal. No more picking a different color tungsten for another type of metal. This is your final stop as far as tungsten. I know I prob sound like I’m being sponsored for this but that’s just how good this stuff really is. Impeccable on aluminum but as I said it’s a step above on any metal. You won’t regret this purchase if you know what you’re looking for in your TIG welding.

Work great!