DigitalDeckCovers Printer Dust Cover and Protector for Canon imagePROGRAF PRO-300 or Canon Pixma Pro-200 Printers [Antistatic, Water Resistant, Heavy Duty Fabric, Black]

(0 reviews)

Price
$23.51

Quantity
(10000 available )

Total Price
Share
5121745 Ratings
3950965
536209
227039
134875
272657
Reviews
  • knittinsis

    > 24 hour

    What else is there to say...easy to install, great value for the price and it works!!!

  • G. Miller

    > 24 hour

    There are some important things to remember when judging Impossible films compared to the traditional Polaroid films you may be used to: this is NOT Polaroid film, nor does it pretend to be. None of the components to make original Polaroid film were possible to recreate or reproduce after Polaroid stopped making it and demolished the factories that made the original materials. This is a completely new film from completely new and evolving materials that are COMPATIBLE with classic Polaroid cameras. In about 1/3 of the time it took Polaroid to perfect and release the original SX-70 film and cameras, The Impossible Project has re-invented the process by which the classic integral Polaroid films functioned and has produced a very impressive product in pursuit of saving Polaroid-format analog instant film from extinction.

  • Mark E. Smith

    > 24 hour

    Im 72 years old and this hot water bottle is a treasure. Ive been suffering residual nerve pain on one side of my face after a Bells Palsy attack, and while pain pills didnt seem to help, hot compresses brought instant relief. But it is a nuisance to soak a cloth in hot water, wring it out, and apply it to my face, only to have it cool off in a few minutes so that the process has to be repeated.

  • John Howard Oxley

    > 24 hour

    This review is in three parts:

  • O. Merce Brown

    > 24 hour

    *****

  • Michael Taggart

    > 24 hour

    For a toy like this - the main thing to rate it on is - did it make you cum. The answer is yes!

  • Ken reynolds

    > 24 hour

    I have owned this brush for just over two years and I am still very happy with it.

  • Jack

    > 24 hour

    Im never in one place for too long, due to military obligations. At first, I was a little shaky paying $2400 for a laptop. Being my first MSI laptop I wasnt sure what to expect. Upon arrival (which was pleasantly quick) I was happy to see that MSI did a fantastic job of packaging. It arrived without a scratch. Set up was decently quick. Once I got past all the initial set-up and adjusting the settings to my liking, I decided to give it a test. I downloaded a few of the newer games I knew would be demanding for a standard laptop. I was honestly shocked to see Fallout 4 (and many other games) run at maxed out settings. Its a whole different gaming experience I never thought Id see. No screen tearing, ultra settings, and the frame rate was fantastic. Honestly better than any previous computer Ive owned. If youre looking for a high end, beast of a gaming laptop. This is it. Look no further.

  • TN

    > 24 hour

    After much research we went with this travel system for our son, weve been using it for almost 3 months and we absolutely LOVE IT. We did have an issue where we received the same back wheels for the L & R sides, they need to be different in order for the breaking mechanism to slide on properly, but after a REAL quick call to baby trend they sent us a brand new wheel so it worked out just fine....The one thing I LOVE about the infant seat is that it has an adjustment wheel on the back so you can simply turn it to move the straps/headrest part up and down, no hard pulling the straps through then re-looping them to a higher/lower setting. The stroller is super easy fold and open after some practice. GREAT travel system for the money for sure!!...This travel system was made in 2008, and it is new enough to have that latch mechanism for the cars so it is difficult to adjust with an older vehicle, we had to prop the base up with something so that the baby was reclined at the correct position. Thats the other thing, this seat has little holes on the side that indicate whether or not the seat is properly reclined on flat ground.

  • MelWalker

    > 24 hour

    Ive tried a ton of various teethers, and these hand and foot ones are the only ones my child seems to like! Hell spit out the others or stop gnawing at them after a few seconds, but these will actually seem to satiate him for quite awhile. He seems to prefer when they are frozen to refrigerated, and they freeze pretty quickly (can be unusable in under an hour). My only negative would be that they do also warm up after not too long (however, as these are the only teethers that hell use, I cant knock off a star). Plus, in this set you get four, so you can have a few in the freezer at once to throw into the rotation. I think he likes these because the material is pretty soft and light (even frozen), and both the hands and feet are easy for him to hold and turn around on his own, though not too big as to be uncomfortable for him.

Canon imagePROGRAF PRO-300 pro 300  protector lid case fabric premiumCanon imagePROGRAF PRO-300 pro 300  protector lid case fabric premium
office accessories technology canon printing photos dust-free water-proofoffice accessories technology canon printing photos dust-free water-proof

What harm can a little dust do?

By the time you see that fine layer of dust on top of your printer, you can be certain at least 3 times that amount of dust has been sucked in thru the vents and holes outside, settling into its internal components that are used to run the printer. While you can wipe that dust on top away, the dust inside just keeps building up in a thickening layer and sticking to the electronics inside by static charge. As it builds, it will definitely become dangerous -- causing your printer to run at high temperatures, and by then, the damage will be done. Overheating is the actual "cause of death" in most electronics and computer items.

In addition, dust accumulation is very damaging for printers; the last thing you want is for a lot of dust to collect in your printer, making its way onto to your photos or documents while printing.

What can I do to extend the life of my printer?

Prevent dust buildup from becoming a problem. The easiest and best way to ensure the integrity of your valuable printer is by using a high quality dust cover.

Why buy a dust cover from DigitalDeckCovers?

  • HIGH QUALITY & ATTRACTIVE. These days you don"t have to settle for a generic, one-size-fits most, opaque plastic cover, or a thin nylon cover made overseas. Instead, you can spend a few dollars more for a DigitalDeckCovers dust cover that will last for many years to come.
  • SIZED FOR YOUR PRINTER MODEL. We double-check manufacturer dimensions, and this cover is made to fit the Canon imagePROGRAF PRO-300 or Canon Pixma Pro-200 Printers. You don’t have to measure and guess the size to buy, or settle for a generic size cover. The cover you receive will match this size we promised: WxDxH = 25.2 x 15 x 7.9 inches.
  • DURABLE, LONG LASTING FABRIC. Our thick 600D nylon with PVC lining will never let dust reach your equipment, and is easy to wipe clean. Unlike other covers, we don’t use cotton twill fabrics which allow dust particles to fall in-between the woven fibers, and we don’t use translucent vinyl that will discolor, dry out, and melt when exposed to heat or light. The color of this dust cover is black. Each cover has serged seams with heavy duty thread to ensure it will never fray at the seams or come apart like those other covers with binded, single-stitched seams, and we double hem around the bottom to ensure a good fit.

Related products

Shop
( 0 reviews )
Top Selling Products