ElectroCookie Raspberry Pi 4 Case, Miniature Desktop Aluminum Case with Cooling Fan and Color Changing Ambient Light (Matte Black & Neon)

Im writing this using the Pi I installed in this case. I bought this because it had a large heat sink. That proved to be a good thing, once I got it working. It runs cool enough, the fan is quiet although it would have been nice to have a temperature-controlled fan. The connectors are super-accessible, but Im a bit nervous about the power, HDMI, and audio connectors. Until I can get a KVM switch, I will have to connect and disconnect at least the audio plug. The back connectors and the SD slot are nicely done. One final problem; at least 2 of the screw holes for the acrylic side panels are stripped, and I didnt apply a lot of torque to the screwdriver. Still, its the best Pi case Ive used, and I highly recommend it.

Nice case that keeps the overclocked Pi nice and cool. But after a couple of weeks the fan starts to get noisy.

... and that is the fact that the screws strip out with very little pressure due to design of the mounting holes on the case. Actually, they are not holes at all, but semicircular channels in the shape of the letter C, so that the screws only make partial contact with the channel. Worse, the screws expand the channels as they are tightened and the result is that it is impossible to tighten the screws snugly. Its a shame, because there is so much I like about the case otherwise. Unfortunately, in my opinion, the screw attachment problem negates any and all positives.

Overall, impressed. The fan was a bit nosier than I thought it would be. The GPIO pins needed an extender for my hats and bonnets.. The adjustment for the leds could be offset more to the left, so you can get at it when you have a hat. One more thing, in this case Im constantly showing a CPU temp that is 10-15c lower than with my old case. Maybe 15c higher than room temp instead of 30c, so pretty good!

I purchased this for a pi 4B. The assembly instructions were great. The unit looks great. Access to the sd card is fantastic. Materials and workmanship are great. It looks nice sitting on my desktop and although its a little larger than a compact pi case, I love looking at it.

This case is pretty cool, it’s the only case I could find that can actually fit the ice tower cooler!, the rgb panel and fan work good too!.

The product is beautifull, Easy to use And Easy to custom the Raspberry; it have the perfect size, great product.

This works perfectly with the low mount ICE cooler to overclock a Pi 4 to 2.2 GHz.

I put a Pi with an ice tower inside the case. Everything fits well. I was surprised that the black part of the case is made out of metal. I was planning to carve a bigger hole to allow my x826 ssd attachment. I decided to mount the ssd on the bottom instead with the screws and standoffs. If you make a similar set up with dedicated x826 space on the bottom, Ill buy it in a heart beat.

Easy install and perfect fit. If I built another I’d buy it again