FivePears 1/2 Inch Shank Rabbet Router Bit with 6 Bearings Set, Adjustable Multiple Depths 1/8, 1/4, 5/16, 3/8, 7/16, 1/2 for Beginner DIY Woodwork …

great product for the price

Beautiful set. I use to cut reveals in picture frames. Accurate. Very well constructed. Easy to change depth.

This 1/4 Shank Router Rabbit works Great and its a Great Value. Glad I bought it.

Worked well. Although I only used one bearing, it did add versatility. I put it under some rough treatment (that a router bit shouldn’t) & it stood up great.

worked for job needed; satisfied.

Bit and collars packaged in closable plastic containers. Bit performs very well and leaves a good clean rabbet.

There is a small Allen head bolt at the end of the router bit with an included Allen wrench. This bolt is removed to change the bearings. The different bearings are how you change the rabbet depth. Unfortunately, this bolt was on so tight the Allen head immediately stripped out. As soon as it slipped the first time, I threw out the junk Allen wrench that came with it and used one of my good ones hoping I could still get enough purchase to loosen it but no luck. Buying a bit with multiple bearings is useless if you can’t change them out.

Overall, the bit seems to be very solid and good. However, the bearings are total junk even when fully tightened they were extremely wobbly and loose and hit the blade shooting out sparks possibly defective. However, I think it was just poorly made. It has been returned. You get what you pay for!

Gets the job done but each bearing falls apart every time I use it. Had to switch them all out with ones I already had.

First off, I do not use these bearings in a router environment. I would if necessary, though. I do use the whole set still on the spindle with a couple of washers as spacers to balance mower blades. I found two sets online but had to have a 7/8 bearing for the center hole on my JD blades. These were the ones. Saw a Youtube video on this, and these work just fine. Couldnt believe the difference in my mowing experience after using these to balance my blades. Very inexpensive alternative to the $120-$180 super magnetic version. Very pleased.