Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz

Great product for drilling and tapping

Small can but you need a drop to do the job!

works

If you drill a lot of holes in metal this is a must have product. its much better than dropping a bit of household oil in the drill hole, it seems to be a must faster drill time.

Excellent product

Tap Magic is a must have when drilling and tapping holes in metal.

This oil will change your life! Its the best cutting oil I have ever seen. It turns drill bits into efficient cutting machines. I highly recommend this and I would say get a bigger bottle if you plan on doing a lot of drilling.

Will make your bits seem stronger/sharper! Its like magic..

Just good stuff. Used it to mill out some aluminum and it performed great.

Used this to drill 18 holes in 1/4 thick A36 steel. The drill bit was 11/16 dia Cobalt. I did not use a pilot hole or any pre-drilled hole. I used the cutting fluid and stopped 6 to 8 times per hole to add the cutting fluid. I was probably using too much fluid each time, but I still have about half the bottle remaining. Good stuff. Thanks