Glieskir Spring Loaded Nail Set Tools,2-PCS Dual Head Nail Setter and Hinge Pin Punch Set, Hammerless 1/16″& 3/32″Spring Nail Set, Super Strong Force Door Pin Removal Tool

This review is for Glieskir Spring Loaded Nail Set Tools,2-PCS Dual Head Nail Setter and Hinge Pin Punch Set, Hammerless 1/16″& 3/32″Spring Nail Set, Super Strong Force Door Pin Removal Tool, Glieskir Item model number PinPunch-1 (ASIN B0BXWTV29D). The tools arrived very quickly and were packaged in a heavy reclosable plastic bag. I confess that at first I was confused about how to use these tools. All of the other nail sets Id ever used required a hammer, but theres no way to use a hammer with these. When I ordered these tools, in my minds eye Id pictured something which operated like a spring loaded center hole punch -- push down slowly and after an inch or so of travel it would impact the pin internally. But thats not how these tools work. To use the Glieskir tools, place the tip of one end against the nail to be set and PULL the other end away from the nail. Stretch the spring for an inch or two and then release. The spring retracts and hammers the nail in a bit. It works remarkably well! I gave the hinge pin punch a try and found that it works just fine. Use the narrow end to remove a hinge pin or the wide end to insert a hinge pin. I doubt that Ill have much use for this tool, though. I wish theyd put a center punch (a sharp pointy tip) on the opposite end of the hinge pin remover, Im sure Id use that much more often than a hinge pin inserter.

Other reviews mention the shortcomings well. Plating not great (and not really necessary, black oxide finish would be preferable), points dont index into finish nail head, spring probably a little too stiff etc. But in a pinch these will get the job done. I wouldnt recommend or do it again, but Im not going to throw them away either. They just go into the collection of better-than-nothing tools that I dig through when Im in a pinch.

Got this for various reasons, from driving something down in a tight location like a hinge pin to marking the spot i need to drill. The quality is superb, and they are so easy to use. Ive already had several uses for them, driving some hinge pins down, which worked better than i could have imagined. These are a definite must in any tool box.

These looked pretty interesting and really require a fair bit of force to operate. They snap back very strong and definitely put some force behind a small nail to set it. Also as a punch yeah it marks pretty well. However the primary reason I saw it was to better set in brad nails for things like framing or trim pieces. In that regard I have to remove a star because the heads are still too large to actually operate in those situations. All the brad nails Ive seen require a smaller tip than any of the ones provided with these two tools. Everywhere I tried to better set a framing nail, the head couldnt even enter the hole the nail was in! Kind of a shame because they produce a heck of a lot of force. So they dont disappoint on the force applied but on the size of the nails you could use them on.

I mainly got this set for removing hinge pins and it seems to work well for that. It’s pretty simple in that it has 2 pieces which are connected by a spring. You simply stretch the spring then let go of one end so that it produces an impact. I was unsure if it would produce enough impact to remove a door hinge pin, however it moved the hinge pin on the first impact. For this I give it 5 out of 5 on Oilboy’s Slainte scale.

These are good quality and have held up well. Makes setting nails easy. Also works well for setting a hole when drilling metal as well!

I was really looking forward to using these; I had several boxes of build it yourself furniture and bookshelves and was hoping this tool would make the process of nailing the backing panels easier. After several attempts, I gave up and went back to the hammer. Maybe Im trying to use them for the wrong stuff. They are built well and durable, they seem to be quality, heavy gauge. Ill be trying these with other scenarios to see what they work best for.

This nail set hinge punch set gets the job done, but I am not sure how well it will hold up. To use the nail set, you position it over the nail you would like to set below the surface, pull back on the spring, and let it snap down and drive the nail. To test it, I drove two 4d finish nails into a piece a fir board, leaving the nail heads slightly proud. I then used the nail set to drive them below flush (see the photo with a before and after for one of the nails). The nail set did the job, but I noticed that the tip of the nail set was slightly damaged after this simple test. It developed burs and it appears that the plating is beginning to flake. This is more damage than I would expect after setting only two nails. Time will tell how well this will hold up, but I am not confident that this will be a long lasting tool, so I give it 3 stars.

This no hammer design is great for tight spaces and to keep from smashing fingers.

I work at a woodworking shop and the boss came in with a set of these. Once trying them out I knew I had to have a set of my own. These seem just as nice as the ones my boss had. I am happy with them so far. The spring seems nice and over all they seem sturdy. These will come in handy.