[Green] Colored 10G SFP+ DAC Cable - Twinax SFP Cable for Ubiquiti UniFi Devices, 0.3-Meter(1ft)
-
skylab
Greater than one weekGreat SFP+ 10 gig cable. I use it to connect a Ubiquiti Dream Machine Pro to a 48 port POE switch via SFP+ ports. Links right up at 10 gigs and has been flawless. I like the green color, as it stands out against the rest of my network wiring color scheme.
-
Tizodm80
> 3 daySo far so good! I have used these on Lucent / Alcatel as well as on Cisco and they performed very well. I like that they come in colors so when I am done with my POC its very easy to trace my cables through the sea of black or blue. All in all extremely happy with this purchase and will be buying these from now on as needed for any installs.
-
Citlalli Predovic PhD
> 3 dayThese work great with my Ubiquiti switches and Dell servers.
-
RubberDuck
> 3 dayIm using this short DAC to connect a US-24 and USW-Aggregation switch together. That is, a 1gb SFP with a 10gb SFP+ port. The two switches were able to auto-negotiate the connection just fine and I did not have to manually go into the settings to force the link speed to 1gbps. I however wished this cable was 1ft or 0.3 meter.
-
+_ceejayy
> 3 dayRating this at 3/5 due to 1/3 cables not working. They all worked for less than 2 months until it started dropping connections. Tried to get it resolved but the amount of time I spent with CC just to let them know that this one cable isn’t working and is dropping connections is way too long. Vendor did reach out to swap the cable after sending the defective cable in but that’ll result back n at least a week of downtime, which at this point it’s a lot easier buying another one instead. For a cable to stop working in less than two months, it’s not ideal. Yeah the price is affordable yet quality may be questionable at best. YMMV.
-
Xevious
> 3 dayPerfect compatibility on my Ubiquiti switches. Going from US-16-150 to US-24 it autonegotiates to 1G without any setup.
-
Jeff
> 3 dayI am using this cable to connect a UDM-PRO and US-24 Switch. I had to manual set port speed in Unifi Controller before link established. The link is 1GB since the switch max speed is 1GB
-
EMT Guy
> 3 dayWorks well between a Mikrotik switch and QNAP NAS.
-
R-S. Villiers
> 3 dayNo issues
-
Hungoverfurball
> 3 dayLove the blue color, stands out in our IT setup. Recognized by both our mikrotik and cisco gear without issue. Havent had a chance to push it at full 10gbps for more then a few mins but for those few mins it was full speed.