Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
dray helms
> 3 dayGood
-
Luis
Greater than one weekYou will have enough for at least two applications on a chip.
-
Truthly
> 3 daygood as it is described
-
Lealda Spainhoward
> 3 dayGreat product
-
MR R A HOSKIN
> 3 dayHaven’t used the product in the end. But heard from recommendations that it’s good.
-
Heidi Weaver
> 3 dayUsed for my heatsink on my rc car esc. I did mean to get the glue kind but this works fine.
-
Andy D
> 3 dayMy PC was starting to throttle under full load. I checked the temperatures and it was hitting 90C under load - which was very concerning since I have an oversized CPU cooler.
-
Jonathan Morales
> 3 dayEverything good but just wished the tube was larger.
-
Jacob
> 3 dayArctic Silver is always the go-to with thermal paste, just please do not apply it like the guy in the 5th picture, you will certainly regret it.
-
Russell A. Fry
> 3 dayWhat more can I say? It is heat sink compound, as long as the component doesnt over heat it is doing its job.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
