Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Miguel Alvarez
> 3 dayI have used this when I had to replace the GPU and processor of my iMac. Worked nice. iMac is still working 3 months after application.
-
Pete H
> 3 dayLowered my CPU temps by 20c
-
cristian
Greater than one weekEasy to use syringe. Comes with a spreader. Dropped my CPU temp by 5 degrees
-
Thomas M. Shepard
> 3 daycame real fast. does the job.
-
JL
> 3 dayEasy to apply, works efficiently.
-
Cristian Borja
> 3 dayTop quality stuff
-
OSCAR ALEJANDRO
Greater than one weekNo trae la palita :( el precio fue más bajo, pero no trae la palita
-
E P
> 3 dayI loooove this product. I have been routinely using Arctic Silver thermal paste thought my years as a PC hobbyist and I love it. It applies easily and works well for years at a time.
-
martin042068
> 3 dayEasy to use and spread. Keeps my Ryzen cool.
-
DeVonte E. Franklin
16-12-2024Best one out.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
