Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(706 reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • Arpy

    > 3 day

    Was having trouble with high temperatures using my old liquid cooler on my latest computer build. After investigating the reviews I found out that an air cooler is better than liquid! This cooler lowered my temperatures and its dead quiet.

  • Prof. Rachelle Schultz DVM

    > 3 day

    It took me 2 hours to install, doing it carefully and planning the steps so I didnt have to backtrack. To say its a big cooler is an understatement. Its *gigantic*, measuring clearances for it on your case and maneuvering it in are two different things. It gets in the way of every cable and screw you can imagine. It really helped to have a *long* (20cm+) screwdriver. The mounting system is well made, the instructions are _crystal clear_, but its quite a bit of work (LGA1151).

  • Maeve Kutch

    Greater than one week

    This must be the best fan cooling rad on the market.It keeps the cpu temp as low as any aftermarket water cooling kits without the stress of an always possible leaking pipe that would destroy your very expansive components.Highly recommended.

  • Mike Atwood

    > 3 day

    Best cooler I have ever had. Whisper quiet, and no worries about having leaks from a water cooler or having the fluid get gunky. You can not get a better air cooler.... period!

  • Price Prosacco

    > 3 day

    Large but does a great job. Fan closest to memory sits higher, so if youre building get low profile memory if you want it to be aligned with the 2nd fan.

  • pc-byggare

    Greater than one week

    Varan annonseras som LGA1700 kompatibel och enligt Noctua ska alla NH-D15 tillverkade efter september 2021 innehålla monteringssats för LGA1700 processorer. Den jag fick levererad var den gamla sorten och var därför tvungen att ordna monteringssats i efterhand. Jag valde Amazon därför att andra nätbutiker inte hade den nya sorten. Visade sig att de bara inte var missvisande.

  • Grosu M.

    > 3 day

    Ottimo in tutto per ryzen 9 3900x, 60 gradi in gaming, 70 gradi in overclock, 35 e 40 gradi modalita lavoro, super silenzioso

  • Tim W

    > 3 day

    This isnt a pretty cooler, but it will keep your processor temps in check under the hardest use. Its also big; really big. Make sure your motherboard has plenty of space around the cpu slot and that you use lower profile ram modules.

  • some body

    > 3 day

    Noctua is an established brand, and this cooler is their flagship (at time of writing). Note: in CoolerMaster H500 ARGB case w/ Crucial Ballistix (3.9 cm tall), the 2nd fan does not fit. I mounted the 2nd fan as top-intake.

  • Max

    > 3 day

    This thing is fantastic. It almost feels like a joke with how big it is. The box it came in is bigger than my head. Do some research and make sure it will fit where you want to put it. I had to move one of the fans up higher to accommodate my ram, but it should make little/no impact to performance. Be aware that if you want to see the top half of your motherboard this cooler might not be for you. The fans are incredibly high quality. I will be returning to Noctua just to buy fans for sure. The mounting was also extremely easy, considering how big and intimidating this thing looks when you first get it out of the box.

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
5G Research Institute
5G Research Institute
( 2490 reviews )
Visit Store
Top Selling Products