Noctua NT-H2 10g, Thermal Computer Paste incl. 10 Cleaning Wipes (10g)
-
Manuel
> 3 dayLas características de la pasta mencionan que es un excelente producto en comparación con otras marcas, sin embargo no observé mucha diferencia en cuestión del calentamiento en mi computadora, probablemente porque ya es algo vieja (2015). El producto se entregó a tiempo y sin problemas de importación., sólo llegó abierta la caja de la pasta, quiero pensar que cuando paso por aduana la abrieron para corroborar el contenido dado el tipo de producto.
-
Jordi
> 3 dayMi RTX 2080 empezaba a calentarse mas de lo normal pero me daba miedo abrirla y las tiendas de informatica tipo APP o Beep no quieren repararla porque les da mas miedo que a mi, al final lo hice yo fue super facil y tarjeta reparada se calienta como 20 grados menos solo por usar esta pasta, totalmente recomendable
-
mm1
> 3 dayIn my humble opinion this is easier to use and works better than any other high-end thermal paste I have used which is pretty much all of them. The CPU that Im using is a I7 5960X overclocked to 4.6Ghz and puts out 227 Watts when hammering it with Prim95. The next best paste that I have used is Kryonautt and this new NT–H2 beats it by about 3° of course if youre not outputting a ton of heat the difference you will see will be less.
-
Jürgen Lingmann
> 3 dayDie Wärmeleitpaste hat sich sehr gut beim übertakten von Prozessoren bewährt, man benötigt nur eine sehr kleine Menge um optimale Resultate zu erzielen. Die Paste lässt sich auch sehr sauber wieder entfernen (auch wenn mal was auf die Finger kommt).
-
Corinna
> 3 dayThis stuff sucks. Originally i had mx4 for my 9900k, wanted to see if there are any better paste out there. I overclock mine at 5mhz all cores. With kryonaut i hit 82c max with a 360 aio on cinebench r20 (4 test in a roll) with Nt-h2 first test i already hit 86c. 2nd test it just kept going up to 92c. i stop after that. i bought Nt-h2, IC-graphite pad and kryonaut. MX4 performs better than this. IC graphite pad performs the same as this.
-
Andreas Schwenk
> 3 daySehr gut zu verarbeiten und leitet sehr gut ab. Bin sehr zufrieden!
-
Kevin Burke
> 3 dayBest bang for your buck if youre looking for good thermal performance.
-
VacMaster1991
> 3 dayNot for laptops. This paste is not for laptops, its way to runny and wet. The paste lasted 3 weeks before suffering from pump out, and the temps went back up. The only paste I would recommend for laptops is IC diamond and Arctic Silver 5.
-
Jayc
> 3 dayJust built 2nd pc with 9900KF and used noctua nh-u12a cooler just wanted a better performing paste i already own one gaming laptop 2 gaming rigs now and big tube is handy for me plus i can test away and still have huge amount left over came with 10 rubbing alcohol wipes and work great so happy with this purchaser.
-
Xianzhi Wang
Greater than one weekHappy with the quality
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 10g pack of NT-H2 includes ten large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
Extra-large 10g package for 9-60 applicationsSufficient for around 9-60 applications (depending on the size of the CPU or GPU, e.g. around 9 applications for large CPUs such as TR4 and around 60 for small CPUs such as LGA1151), the extra-large 10g packaging size is ideal for power users who install coolers frequently. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
