SABRENT M.2 NVMe PS5 heatsink (SB-PSHS)

So I already had an aftermarket heatsink for my WD Black SN850 1TB nvme m.2 2280 SSD that I ordered off Amazon when I got the SSD for my PS5. At the time there wasnt very many options and the 1TB WD Black SN850s with on-board heatsinks were either all sold out or going for a 100% mark up. Thus I purchased an aftermarket chinese heatsink built for going in a PC with lots of airflow. When I went to remove the SSD when this Sabrent heatsink, built specifically for the PS5, came in you wouldnt believe how hot that heatsink was. Even with a a layer of thermal pads sandwiched between the heatsink and the SSD. This Sabrent heatsink does what its intended to do. It creates more metallic (aluminum) surface area for the heat to disperse into and away from the SSD. While still utilizing the negative pressure design of the PS5 to remove heat from the expansion card port. The fan also draws new air over the top of the heatsink as well which helps keeps temperatures in check. My dislikes are that the thermal pad provided and pre-installed to the heatsink feels less like a thermal pad and more like a foam one. The thermal pad only goes on the top of the SSD with this design as well. So if you have a double-sided SSD you might want to find a better solution. My last gripe about the thermal pad is its length. Its short enough to only cover a 80mm long SSD. So if for some reason you have a 110mm drive you might want to buy a different thermal pad as well.

Its runs a bit hot. I have a hard time keeping it below the 70°C warning range; installed as the primary OS drive in a Dell Vostro 7500 laptop. I even bought and installed silicon gell therma pads, but it still averages 65°C plus temepares. It appears to be affecting the drive life performance estimate already. Depending on the computer and temperature regulation method, this may not be ideal to use as a primary drive.

S’adapte très bien à la console rien à dire je conseil

PS5 doesn’t recognize it. And yes, it’s installed correctly.

Easy installation. Came in durable metal case. Runs fast

Bought this to extend my PS5 storage. As has been mentioned in previous comments, I also purchased this heatsink to go with it:

ottimo e veloce

Highly suggested by all PS5 upgrade sites.

il dissipatore di calore per SSD PS5 di Sabrent è progettato per sostituire la copertura metallica dell’alloggiamento dell’unità SSD M.2 della PlayStation 5 di Sony, fornendo allo slot le stesse protezioni della staffa originale di Sony e fornendo agli SSD l’accesso a un dissipatore di calore più grande che per consentire così un maggiore flusso d’aria.

I have watched many videos on PS5 heatsyncs and this one by far seems like the best bang for your buck as far as cooling speed and quality goes. Fits perfect with the WD black SN850 I got and haven’t had any issues. 10/10