Single Mode LC Gigabit Fiber Media Converter - Includes LC SFP 20 km (12.42 Miles) LC – to UTP Cat5e Cat6 10/100/1000 RJ-45 – Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support

(0 reviews)

Price
$40.28

Quantity
(10000 available )

Total Price
Share
17 Ratings
14
3
0
0
0
Reviews
  • Brian Gorenflo

    > 24 hour

    Very easy to install & already come with the GBIC modules! Perfect for converting LC fiber runs in to Ethernet hand-off for your network.

  • Mr. Ashton Ferry V

    > 24 hour

    They shipped it to me right away and it was so easy to set up and use. The only down side is i tried to order a second identical one and amazon kept sending the wrong one. (I know that was on amazon and not the manufacturer)

  • ziggy

    > 24 hour

    Reasonable cost way to terminate a fiber line into existing ethernet gear

  • Sares Kay

    > 24 hour

    I have been running fiber up towers 200 to 400 feet, for my M5 radios, these are great, down side they are 5 VDC, not a real problem just split the POE going to the antenna (24VDC) tap it and put it through a power regulator (5VDC) your set on top.

  • Michael Brock

    > 24 hour

    It was pure plug-n-play. Excellent product.

  • tc0nn

    > 24 hour

    I bought this to run fiber out to my RV so I don’t have to rely on Wi-Fi. Works great! 1gbps internet to the camper keeps the wife happy too

  • hexbuilder

    > 24 hour

    Works as advertized, 1GB ethernet converted to fiber and back.

  • Wade

    > 24 hour

    Nothing to dislike about the item this is a well made product, the mounting holes on the two rails could have been better positioned to make it item mountable inside structured boxes like Leviton, On-Q etc .

  • Jaymann55

    > 24 hour

    only complaint is print is small to see tx and rx ports

  • B. Hall

    > 24 hour

    I bought two of these along with a 150 meter pre-terminated LC single mode fiber cable. Setup is literally plug-and-play, and everything works perfectly. I had to pull the fiber cable through a 400 ft underground conduit to extend our LAN to a separate building, and this made the job easy. I have a switch connected on the other side that is passing all VLAN traffic through the connection between the media converters. Works as advertised without any fuss.

Dual Power AC + DC SM LC 1310nm Fiber Media Converter WDM LC fiber to ethernet media converter pair 1310 nm 1550nm single fiber single mode power over ethernet poe ethernet over fiber poe camera poe injector fiber optic optical media WDM SC fiber optical media converter with DIN rail option
LC Single Mode Gigabit 20km (12.24 mi) Built-In Fiber Module Media Converter SC Single Mode Gigabit 20km (12.24 mi) Built-In Fiber Module Media Converter Dual AC+DC LC Single Mode Gigabit 20km (12.24 mi) BuiltIn Module Media Converter Single Mode LC WDM Bi-Di Single Fiber Gigabit Built-In Fiber Module Converter PoE Single Mode LC 1310nm 20km (12.42mi) Power Over Ethernet Fiber Converter Din Rail Industrial Mini Type Single Mode Single Fiber WDM SC Media Converters
Speed Gigabit Gigabit Gigabit Gigabit Gigabit Universal: Gigabit / Fast Ethernet
Autosensing to 10 / 100 / 1000 Mbit/s
Fiber Type Single Mode Single Mode Single Mode Single Mode (1 fiber - Single Strand) Single Mode Single Mode (1 fiber - Single Strand)
Fiber Connector LC SC LC LC LC SC
Wavelength 1310nm 1310nm 1310nm 1310/1550 nm A-side | 1550/1310nm B-side 1310nm 1310/1550 nm A-side | 1550/1310nm B-side
Power Supply AC adapter in set AC adapter in set AC + DC dual power input AC adapter in set AC adapter in set 9 - 55 VDC (AC adapter in set)
Maximum Reach 12.24 miles (20 km) 12.24 miles (20 km) 12.24 miles (20 km) 12.24 miles (20 km) 12.24 miles (20 km) 12.24 miles (20 km)
Size 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) 30mm (H) * 110mm (D) * 140 mm (W) / 1.18 in (H) * 4.33 in (D) * 5.51 in (W) 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) 60* 50* 35 mm (2.36* 1.96* 1.37in) (L*W*H)
DIN rail support
PoE/PoE+ PSE Output

Plug-n-Play Solution to Extend Ethernet over Single Mode Cables up to 20 km (12.42 miles) –High Performance 1310nm Wavelength SFP module pre-installed

Extend your Gigabit or Fast Ethernet Network Over Single Mode Fiber Up to 20 km (12.42 miles) using 1310 nm With Ease

AN-UM-SMC-AS-J+SM-SFP-KIT Single Mode Fiber Media Converter Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port -

You just need plug in the cables and it will work right away!

Powering it up?

Easy, it will come with an AC power adapter in the set, just plug it in!

Sturdy, Stable, and Easy To Use

  • Supports Jumbo Ethernet Frames up to 9000 bytes (if needed, configurable by dip switches);
  • Supports QinQ and VLAN"s - MTU size big enough to pass them through;
  • One 1000Base-LX Single Mode Dual Fiber port Port with LC type connector - up to 20 km (12.24 miles) distance using 1310 nm wavelength
  • One 10/100/1000Base-T RJ-45 port Autosensing featured - adapts to all 3 speeds!
  • Compliant with IEEE 10/100/1000Base-T and 1000Base-LX
  • Connect it to Gigabit or Fast Ethernet ports or even 10Mbps ports
  • When used standalone (paired with other devices), be sure to check that wavelengths match - 1310 nm used in these converters.


Versatile Protocol & Features Support

  • Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
  • Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-LX
  • Transmission Wavelength – 1310 nm, Fiber Connector Type: LC
  • Power supply: 100 to 240VAC 50 to 60Hz, US type power plug
  • Dimensions: 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H)
  • Environment: Relative humidity; 5% to 90%
  • Operating temperature: 0 to 70 degree Celsius (32 - 158 F)
  • Supports LLF feature - Link Loss Feature - (if needed, configurable by dip switches)
  • Supports Jumbo frame (if needed, configurable by dip switches)

More Features, More Convenience and Peace of Mind!

Setup of these units are really easy as the 3 steps shown in picture gallery - all default settings will work for all of your cases, but if you can turn on/off LFF feature or Jumbo frame - do it!

While in most cases you will have LAN switches, WiFi routers, or regular PC"s connected to media converter UTP port - this versatile converter will still work with any standard Ethernet port device!

Scale Up Your Network as You Grow!

Autosensing10/100/1000 Gigabit Ethernet port auto adapts to Fast Ethernet speed device as well.

BONUS!

+ you get free wall mount ears and rubber buttons in set!

Related products

Shop
Kim's Store
Kim's Store
( 0 reviews )
Visit Store
Top Selling Products