Suburban 232258 2-Prong Electrode Assembly

Fit perfectly and fixed the staying lit problem.

Thought i should give my experience on this. Went camping the other day went to fire up my water heater and it would ignite flame would fire up and after about 5 seconds would shut off. The electric spade had broken off my old electrode. This is an ignitor and flame detector. Old electeode was not detecting flame. Very easy fix 1 screw and hook electric wire back on be careful not to break spade off. 5 minute fix. Hope this helps someone else. Up and running again!

I bought this to replace on a swd6e model. Fits perfect. I shouldve checked my board first because that was fried, but I installed this in 2 seconds so I decided to keep it. After replacing the board (recommend Dinosaur UIB), my water heater fired right up. So I probably didnt need this part, but it is working great for me.

Appeared to be aftermarket or some other company makes it for Suburban. Different label packaging and sightly different part. The prongs where a little shorter than the original factory part so I used a screwdriver to bend the bracket slightly so get it in the correct position. Dont try to bend the prongs as you might damage the ceramic. My problem ended up being the circuit board but I had to at least try the lower cost part first. It will work though. Thanks

put in the hot water perfect fit

This is all I needed and the cost was just over $13.00 and it works great. Dealer charged $70.00 to diagnose why the water heater would not light. Mobile-home Dealer wanted to sell the entire electronic assembly for over a $100.00. Glad I chose to wait and not have the dealer to install theirs. At least for my $70 I got them to show me how to replace the electrode. Took me almost 5 minutes to remove the old and install the new.

It fixed the problem with my hot water heater not lighting

Item as described and it works great.

Just what I needed. Super fast delivery

Exactly the same igniter as the original.Worked the first time.