TUSITA Flush Out Front Mount Compatible with Garmin Edge GPS Bike Computer, XOSS G/G+, Quarter-Turn to Friction Flange Mount Adapter Included

(829 reviews)

Price
$10.14

Quantity
(10000 available )

Total Price
Share
29 Ratings
22
7
0
0
0
Reviews
  • Benjamin wheeler

    > 24 hour

    Setup was super easy! After figuring out where exactly I wanted to place it, I bolted it down and I was good to go. Placing the computer was just as easy by turning clockwise into the bracket. It snapped into place and I was off to the trails! I have used this for a few weeks and absolutely love it!

  • T.av

    > 24 hour

    This is an aftermarket (aka knock-off) for the Garmin front mount. It includes both the mount (Garmin sells for $34) and the quarter turn friction flange (Garmin sells for $15). So for $15, is it good? Short answer:Yes. Long answer: keep reading.

  • James Houghton

    > 24 hour

    This is a nice mount with all the needed hardware to install on a variety of handlebar sizes. The thumbscrew to tighten it down is good sized and easy to use. It fits my Garmin bike computer perfectly and it has the lower attachment for my Garmin trail cam.

  • OCD_OBD

    > 24 hour

    Ive been needing an out front mount for my light. I looked at the specs and this one looked like it would work.

  • Boopie

    > 24 hour

    Bought this for my Edge 130 to replace the goofy little holder that Garmin sends you. This mount should be standard equipment. Easy to install, rock steady and gives a very clear view of the screen. Easily 5 stars.

  • eljc

    > 24 hour

    This mount is easy to assemble and install. The rubber rings make it simple to fit any size handlebar. It is especially versatile because you can securely mount a camera or a light right under your bike computer. All tools and attachments are included.

  • Hector Cervoni

    > 24 hour

    Very good addition to my GoPro. Very easy to install

  • Run26

    > 24 hour

    This is a nice mount for both GPS and action camera at the same time. Went on easily with rubber non-slip backer ring, only one screw (included) to tighten. I tested it with my Garmin GPS and GoPro camera and they mounted easily and securely. I’ve paid twice this for mounts that only hold a GPS, so this was a good deal.

  • Armand G.

    > 24 hour

    Like many cyclists, I have a Garmin bike computer. It came with what Garmin calls an up front handlebar mount. It works great but I have two bikes and like to move the Garmin computer between bikes.

  • Rita Mayert Sr.

    > 24 hour

    The mount itself is a bit on the heavy side compared to others Ive used, but thats good in this case, because the arm comes with two locking mechanisms. The one on top of the mount is the expected Garmin-style bike computer mount (quarter turn to lock in the computer). But theres also a second mount that locks in underneath the mount arm via a quick-release mechanism. That bottom mount can accommodate a GoPro or GoPro mount-compatible bike headlight. Its a clever design, with a nice accessible thumbscrew used to control the tilt angle of a bottom-mounted accessory. With a GoPro or similar accessory attached to the bottom of the mounting arm and a bike computer on top, I expect that the extra weight of the arm would be welcome. I only mounted a bike computer on top, which worked just fine. Super solid and the locking action was tight and confidence-inspiring. This is a nice mount, particularly if you want the dual-functionality of computer + GoPro or computer + headlight setup using just one piece of mounting hardware.

11
22

Wide Compatibility:

  • Compatible with All Garmin Edge GPS cycling computer, edge 1030 /130 /130 Plus /530 /830 /Explore etc
  • Compatible with Garmin Varia UT800 Smart Headlight
  • Compatible with Garmin Charger Power Pack
  • Compatible with XOSS G/G+ GPS Cycling Computer
  • Compatible with iGPSPORT GPS Bike Computer
  • Compatible with Gopro interface Sports Action Camera
  • Compatible with handlebar diameter 25.4mm and 31.8mm

What"s in the Box:

  • 1 x TUSITA Flush Out Front Mount
  • 2 x Spacers for 25.4mm and 31.8mm bars
  • 1 x 1/4 Friction Flange Mount Adapter
  • 1 x Hex (Allen) Key
33

Take TUSITA BIKE MOUNT When You Riding

  • Stay ahead of the pack with this TUSITA computer mount that lets you to take full advantage of your GPS"s capabilities without compromising your ride. The TUSITA bike mount replacement gives you easier, heads-up positioning for easier monitoring and safety.
  • It also compatible with Garmin Varia UT800 Smart Headlight, Gopro interface Sports Action Camera. So you can ride in the night and it is perfect for video while riding.
  • The TUSITA out front mount created from advanced injection moulded co-polymer. Easy to install, more versatile, and more stylish design to complement your GPS and your bike.

11

1212

1313

Safe & Secure: We are confident that upgrading to a TUSITA Cycling Mount will give you piece of mind knowing you’ve chosen the best way to securely lock and perfectly position your computer on your bike so you can focus on your goals, whether that be having fun or going fast, or both

Quick & Easy to Install: Mount on your bicycles handlebars in under 60 seconds. Convenient installation kit makes it very easy to install and disassemble from any Bicycle Handlebar,only need to locate and lock nut.

Two Spacers for More Handlebars: It is widely used in road bikes with 25.4mm and 31.8mm handlebars, enables you to easily view performance data on your bike GPS computer. It is strong enough to keep your electronics where you want them on your bicycle no matter the terrain.

Related products

Shop
( 941 reviews )
Top Selling Products