VSDISPLAY HD-MI DVI VGA Audio LCD Controller Board for 17 17 inch M170ETN01 1 WYD170SKD 01 LVDS 30 PIN LCD Display, for Mod Machine ( m170etn011 m170etn01.1 M170QGBN30-01B CD170A54-01 )

Bought it for my cabinet to do a Raspberry Pi 3b+ install, worked great!

Great value. Works great with my modded Arcade 1Up. The picture looks excellent.

This item really does work for the arcade1up marvel screens! I purchased a 5:4 prior to purchasing this board and the bottom half inch of the screen was cut off. Not with this board! The entire screen is 100% visable!! The only issue that I ran into was the first board arrived defective but Amazon took care of it and sent another out within two days and that replacement worked! If your first board doesnt work dont give up, as I guarantee you these do work!

Purchased specifically for my Arcade 1up TMNT cabinet and it works perfectly. Check the monitor model number on your cabinet before you buy!

I bough this for converting the LCD connection on my Marvel Super Heros arcade 1up cabinet to HDMI. There is no audio amplifier on this board only output. Make sure your LCD panel is the right model for the controller boards. For the GEN 3 1up cabinet I have, it took this controller board. I was able to reuse the power supply from the cabinets old controller board to power this. I attached this using double sided Velcro tape making sure to cover the back of the LCD board so that it didnt touch the metal LCD panel backing.

Works well with my asteroids arcade1up no problems at all

Get a heat sink for the cpu. Other then that. Its great

Works great on Gen 3 popular branded cabs

Got this for my Arcade1up to Raspberry PI. Works great. Remember that the red wires are towards PIN 1. Should have a white mark on the connector too. Even though the original screen resolution was 1280x960, I have tested this to work up to 1920x1080. It should be able to go beyond that resolution, but I dont believe the LCD supports higher. No remote is included, but appears to have the option...

.