WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
seppe
> 3 dayDoes the job well!
-
BENJAMIN
> 3 dayExcellent value. I love these extenders. They work quite well and are quite configurable. A+Fast and easy install. Pocket size. Not big and in the way all the time!!
-
KIMBERLY
> 3 dayAfter carefully following the installation instruction and checking my connection near the extender, I found no noticeable improvement in signal strength or quality. Couldnt believe how pretty easy it was to set up. Pretty much plug and play. The extender found my network and is working perfectly!
-
Ryan Holley
> 3 dayMy Room is far away from our Internet Router before I purchased this, my internet sucked! Once I bought this my internet is great! This range extender was easy to install and set up!
-
JERRY
> 3 dayIt works!Does the trick and my home is big. I was losing wfi in the far reaches upstairs. Just put this baby in the hall, centered and now i get excellent signal everywhere. pretty easy to set up as great and nice to have on line help when needed. I would highly recommend it to anyone needing a stronger signal in their home.
-
Maseice
15-12-2024Also der Preis war vollkommen super und auch stylisch gesehen macht das Ding was her ABER...
-
JOYCE
> 3 dayThis one succeeded where others failed. Good combo of range and throughput. Recommended.Work as expected! 20 feet from router upstair and working great range!
-
REBECCA
> 3 dayPurchased due to sketchy Internet service in our upstairs. Easy installation and since we have plugged it in we have had no more problens. Very happy with this!
-
Anion
> 3 dayWirklich ein gutes und auch langes Kabel. Bei mir laufen meine vollen 50k durch und ich kann es ohne Probleme einmal quer durch die Wohnung legen. Es sieht auch sehr hochwertig aus und nicht nach billiger China Produktion
-
Danielle Bentley
> 3 dayWorks perfect. You have to remember when expanding your wireless network your never going to get the same speeds as the router. My speeds go from 7 MB/s with my router to 2 MB/s with this but thats way more then enough to do what i needed to. The range on it is good and i never had any issues with it!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
