2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
KIMBERLY
> 24 hourSon was having Wifi problems in his room. we live in a small apartment, but his room is in a back corner and signal was weak or slow. It was easy for him to set up
-
MARGARET
> 24 hourAfter several tries I was able to set up the initial connection. With the extender, I successfully increased the coverage of my wifi network including the basement and 2nd floor of a 14000 square foot concrete building.
-
BENJAMIN
> 24 hourThis works like a charm I have a TP-Link Router so this literally took me about 5 mins to get up and running and now I finally have full coverage in the house, definitely recommend this product but I specifically looked for a TP-Link product to avoid problems from having different manufacturers
-
Norbi K.
> 24 hourFunktioniert eiwandfrei.
-
Michael
> 24 hourSchnelle Lieferung, gutes Preis-/Leistungsverhältnis
-
123
> 24 hourArtikel entspricht überhaupt nicht dem Produktinformationen!!!!!!
-
JERRY
> 24 hourIt was easy to set up and everything, but when I had it plugged in it either caused interference or sucked the power away from my smart tv and caused it to shut off every two minutes. I had to unplug. So I spent my money for nothing.has been working well! i am not really smart in this area, but it allowed us to run an apple tv off our internet which was set up far away from the bedroom during our home construction process.
-
Hose
> 24 hourAlles i.O. Kann ich empfehlen, es gibt nichts daran auszusetzern. Funktioniert einwandfrei. Gute Qualität.Alles i.O. Kann ich empfehlen, es gibt nichts daran auszusetzern. Funktioniert einwandfrei. Gute Qualität.
-
MARY
> 24 hourThis item was plug and play right out of the box and extended my wireless network into my garage so that my new wireless sprinkler controller worked better.
-
SANDRA
> 24 hourLove this extender. It is so pretty easy to just unplug and move. All you do is plug it in when you move it and it boots up in maybe a minute and is ready to go. My house is about 3300 square feet and we own 2 of these and they are great.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
