ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

Cumple perfectamente... Buen corte y me parece buena su construcción

The quality of these cutting tool are great. Upon arrival you will notice that every piece of hole punch has a burr or the inside along the edge. To remove the burr, I just used a rolled 1000 grit sand paper and used it as a strop to remove the burr edges, Just make sure to only sand away from the burr edge to pull the burr piece back up again or snap off. Once the burr is removed from every hole punch, you will be able to make sharp hole punches if you use the correct bottom plastic punch board and a solid base. If you don’t have a solid bottom heavy base, your hole punches may not get the correct pressure needed for a nice hole punch. I used this punch set to cut into 1/8 thick cowhide leather to make perfect sized holes. I pitched a plastic bottom punch board which feel like a plastic cutting board. For my solid base, I used a 25 all steel weight lighting plate and hit my leather with the plastic.punch board between them. It works flawlessly and the edges stay sharp longer if you remove the burr before using. Takes less than 1/2 hour to de-burr the whole set. I used a cheap rubber mallet with a wooden handle to hit the back of the punch tool. No damages done to the tool and the rubber mallet works perfectly. I rate this product as 5 Stars for quality and value, All it takes is a little de-burring and you set for a long while before sharpening.

I got this to cut holes in gasket material

I like that I can easily remove the center pin. I wanted for the round cut-out more than needing a hole cut. very sharp and seems to be holding a good edge after several dozen circles cut.

Just what I needed. Waited too long to purchase.

it works good,wish there was one size larger,but its still good overall

Great little tool. I bought it for my sons science class at school when I found out they were using a paddle bit on a drill to make holes in cardboard and it works great.

Cut rubber and cork gasket material fine

Works great for gaskets just make sure to use on plywood now cardboard ontop of metal

Work good after I sharpened them with a drumel