ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Mike
> 3 dayGiving this 3 stars because it seems to be working fine but not five because I received a unit that was 4 years expired. Yes, years.
-
Sonny
> 3 dayGreat paste, great on pasta, toast, even cpu.
-
Thomas L.
> 3 dayLowered my temps by almost 20 couldnt be happier.
-
H. Ly
> 3 dayPretty hard to spread as it felt thicker than some other brands. However, seems to work well enough. Don’t bother with the tiny spatula. Either spread with a credit card, or use 4-5 mm drop at the center.
-
jie
> 3 dayIt fix the CPU heating problem of my laptop, and very easy to be applied.
-
Chelsey
> 3 daySo I applied this to a I7-9700k with a 240 corsair AIO and at idle its about 28°c and at about 80% usage is sets about 45°c. I dont overclock or benchmark but Id say it works very well
-
ElBig
> 3 dayPour cpu
-
Rezilin
Greater than one weekUtilizing this on a threadripper 2950x, its alot for what you get. I had to re-seat the processor and clean off a whole gram or so of it and still had plenty to spare, but that was due to my own mistake and no fault of the compound. Could probably redo all the thermal paste on a cpu, gpu and anywhere else you would need it for a personal pc or even a couple if your building a bunch at once. Its a slight bit tacky when spreading but the little spatula they give you is great if you have a specific shape you want to form the paste to. I still used it as a blob and am getting good temperatures. Upon removing it the initial time the spread was even and coated very well, just as with any paste you have to estimate how much to use if you go for a pressure spread blob method.
-
snowmanllooll
> 3 dayUsed for Putting New Paste on older gaming laptops, works very well, not overly messy.
-
Nein
> 3 dayGood product
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
