Cooler Master NR200P MAX SFF Small Form Factor Mini-ITX Case, Custom 280mm AIO, 850W SFX Gold PSU, Triple-slot Vertical Mount GPU, PCIe Gen4 Riser, Tempered Glass or Vented Panel (NR200P-MCNN85-SL0)

Cable management is difficult, especially for a first time mini itx build.. What else can I say? I managed to squeeze and 3090ti Fe inside.

Esta ventilado por 5 de sus 6 caras, por lo que el calor no es tanto problema, soporta ventiladores, disipadores y tarjetas gráficas de buen tamaño a pesar de ser tan compacto, puede aguantar fuentes ATX pero toca hacer concesiones si planeas ponerle un disco duro de 3.5 pulgadas, así si planeas ponerle una gpu de más de 2 slots de grueso toca poner ventiladores slim o en su defecto no colocarlos (depende del caso ni falta hace), a parte del tamaño compacto permite ponerlo en un escritorio pequeño

I love almost everything about this case. My Number One complaint is layout for the Vertical GPU and AIO at the bottom of the case. By mounting the AIO on the bottom (recommended by CM) youre causing the pump to be at the top of the loop which reduces performance and increases noise. This could have been avoided if CM had designed to the top of the case to allow an AIO. But of course youre not required to use this layout nor does using it cause any type of failure. Its just not optimal nor is it recommended by any AIO manufacturer. They just arent designed to be oriented that way. With that aside, this case is phenomenal. I love the ventilation this case offers, along with the style from the side panel. I built my case using the Aorus X570 Pro Wifi Mini ITX MOBO, Lian Li 240mm AIO, Two SSDs mounted at the front, Corsair SFX600 PSU, and a GTX 1070 (until 3080s are readily available). Cable management was great considering the size of the case and using stock PSU cables. The AIO tube routing leaves a lot to be desired but works none the less. The fans included with the case are decent, and I love the no tool design for quickly removing fans as needed. The front IO is perfect for my needs but I could see some wishing for more. If youre looking for a nice SFX case to build in, I think this should be a top contender on your list. Its a fantastic case, and is a breeze to build in. CM has outdone themselves with the engineering with this case, but there are still improvements that can be made. Im happy with my purchase, and would do it again.

The ITX space is growing but still has limited options. This case checks most of the boxes for ITX build but my only concern is the custom AIO in the case. Just know that if you ever have an issue with your AIO you can not buy another brand or even a CoolerMaster off the shelf. This is a custom built AIO for the case so if it goes bye bye then you have to work directly with CM to get another. In my case I purchased 2 of these. The first one was fine but there must of been air bubbles caught in the pump because it would constantly crackle in that area. I disconnected all the fans and even the gpu and ensured the sound was from the pump. I purchased another and it seemed fine but once again after a day of use I started hearing the crackle. I contacted CM and they were great but they were going to have me send it in. I didnt want to deal with this down the road. There are many ITX cases that you can build with off the shelf parts so if something dies or goes wrong you can quickly get a replacement. Case is awesome but I wish the AIO wasnt custom. If they could design it where you could use any 280mm AIO that would be a 10/10.

4 stars only because there is no way to screw in the side panels, and they like to fall off when the case is tilted sideways. The positives: Was able to fit an Asus Prime B250M-A mATX motherboard in here (10.24 x 2.03 x 10.63 inches). Had to forego the I/O shield as well as relocate the external power plug so that the motherboard could slide up to the top of the inside of the case. Was able to fit a full size tower cooler with not a single millimeter to spare. Also managed to squeeze in a full ATX power supply but there was nowhere to mount it. Literally everything other than the fans and CPU cooler are zip tied. No screws were harmed (or used) in the making of this PC. Overall this is a great little chassis. No annoying/ugly branding, very svelte and nice looking. Cozy inside. High quality construction overall.

Overall, the case is amazing. The materials are solid and the finish is beautiful. That being said, this case needs to be sold as a bare-bone. My included psu has really bad coil whine when gaming. (Used a mechanics stethoscope to very it was psu and not gpu). Not to mention that many new cards are recommending 1000w PSUs. I love the layout of this version over the standard nr200p. I had to change out the included fans with some Noctua ones and set them as intakes. Also added slim Noctua fans to the bottom as an exhaust. My Ryzen 7700x and RX6800xt both stay in the 50s to low 60s when gaming. If it wasn’t for the PSU coil whine and the price, this would be a 5 star review. Which is the other point. This case would be the best itx case on the market at $349, which is what it was originally rumored to be at. Over $400 is just insane for this, especially with the poor PSU choice. I would still recommend the case, it just needs to be released as a bare-bones at $120-$149

Simply put, best itx case. It runs on the larger side of itx cases yes, but what that means for you is: improved thermals, space for high end components with no compromises. I put an evga 2080ti XC Ultra , deepcool castle ex280mm aio, two slim fans under the gpu, x2 2.5 SSD’s, the 120m fan it comes with as exhaust to give you an idea of how much it fits. The case itself comes with a 92m fan on the back and a 120m for the top. A 280mm cooler is going to interfere with the small fan on the back so you will have to remove it, and if you’re using an sfx-l psu, it will interfere with a top fan at the top. (Check pics)I’m going to try with a slim fan at top to see if it fits fine. The thermals in this case are simply amazing. I’m running a 10th gen i9 with a gentle 5ghz oc and it idles at 33c, 45-55c while gaming and 86c under stress testing. Cooler master did a HECK of a job with this case honestly. I always wanted to build in an itx case but was always put off by the all the compromises. Cooler master did an impressive job with such a small case by allowing you to pack as much hardware as possible without choking the internals. Overall, the case looks beautiful. Minimalist, the white looks absolutely gorgeous.

This case is awesome, well designed, well made. This was my first computer build, and my son, who has some experience, questioned my decision to go with the NR200P given the additional challenge of working in a small space--until he saw it in person. He was so impressed, he wanted one for himself. Here is my build: Intel Core i7-12700K ASUS ROG Strix B660-I (mini-ITX) Nvidia RTX 3070FE GPU Kingston Fury Beast DDR5 16 x 2 RAM (rgb) EVGA Supernova 750W SFX power supply (note small form factor) SK Hynix Platinum P41 2 TB m.2 SSD SK Hynix Platinum P41 1 TB m.2 SSD Thermalright Silver Soul 135 white cooler Arctic P9 PWM PST 92mm fan Arctic BioniX F120 fans x 2 Chassis fan hub CPU Cooling (the really cryptic looking one) Noteworthy: The Thermalright cooler DOES fit, even with the glass side. Actually has some room to spare. The Kingston RAM has only about 2mm clearance from the cooling tower. But 2mm is enough. My fan hub sits behind the front panel, nicely hidden, because its not pretty. I routed several things behind that panel. You can also place SSDs there, but mine are both m.2, directly plugged into the MB, so that front panel was wide open for wires. I added two fans on the bottom and one at the back. Based on my review of the literature (YouTube), the best airflow with a cooling tower is to intake from the bottom and back, and exhaust thru the top. Including the fan in the center of my cooling tower, I have 6 fans in here and no problems with heat. The two stock fans are on top. I did add a magnetic filter on the back to block off the openings back there. My computer sits right next to an air filter which is right next to a chinchilla cage, with hair and dust floating everywhere. ______________________________________ Everyone talks about the challenge of routing the cables in such a small case. For me, this was the fun part and I was very happy with the outcome. Like I said, Im a first time builder, so I have no experience. Which means you can do it too. You can decide based on the pics whether you think I did a decent enough job. Just ordered another NR200P for a surprise system for my dad. Hope it goes as well as the first one, but if it doesnt, the problem wont be the case! LOVE LOVE LOVE the colors, too! I wouldve gone with pink if it hadnt been $50 more at the time of my build. Even thought about getting one now and switching everything out, but decided not to rock the boat.

Great case for builds. Plenty of space in a small package. Not the smallest case out there, but small enough to be small form factor. Very easy to build with this case, you can take the entire thing apart. Plenty of airflow. Great bang for the buck, you cant go wrong with this case. This case is designed for SFX power supplies, but you can fit a bigger PSU in it, but I recommend just sticking with SFX power supplies.

So happy I can fit my ASUS RTX 2070 super strix. So far the Thermals are not too bad. Ill need to upgrade my cpu cooler soon. Processor Information: CPU Vendor: AMD CPU Brand: AMD Ryzen 5 2600 Six-Core Processor Speed: 3894 Mhz 12 logical processors 6 physical processors HyperThreading: Supported Operating System Version: Windows 10 (64 bit) Video Card: Driver: NVIDIA GeForce RTX 2070 SUPER DirectX Driver Name: nvldumd.dll Driver Version: 27.21.14.5206 DirectX Driver Version: 27.21.14.5206 Driver Date: 8 12 2020 OpenGL Version: 4.6 Desktop Color Depth: 32 bits per pixel Monitor Refresh Rate: 120 Hz DirectX Card: NVIDIA GeForce RTX 2070 SUPER Number of Monitors: 1 Primary Display Resolution: 3440 x 1440 Desktop Resolution: 3440 x 1440 Primary Display Size: 32.24 x 13.62 (35.00 diag) 81.9cm x 34.6cm (88.9cm diag) Primary Bus: PCI Express 8x Primary VRAM: 8191 MB Supported MSAA Modes: 2x 4x 8x Sound card: Audio device: Speakers (Logitech G933 Gaming Memory: RAM: 16312 Mb