Cooler Master NR200P MAX SFF Small Form Factor Mini-ITX Case, Custom 280mm AIO, 850W SFX Gold PSU, Triple-slot Vertical Mount GPU, PCIe Gen4 Riser, Tempered Glass or Vented Panel (NR200P-MCNN85-SL0)

I have a x570-i gaming mobo with ryzen 5950x and RTX 4080 with radiator fans blowing up and out of case and two slim 120mm fans blowing down and out under the gpu in my enclosure and have had zero issues with cooling or fan noise. Im running with the side mesh panel. The built in PSU can handle the cpu and gpu just fine and came with enough pci express connectors for the 4080 without having to mod or change anything (4080 takes three) Cpu maxed out usually sticks in the low 70s C and gpu usually around high 60s at max (though Ive not a professional benchmark guy so take that with a grain of salt) This case is tiny, yet still spacious for an itx build and very cool and silent

I used this for a gaming PC build. No issues whatsoever; I am very satisfied with the quality of the material. Easy to disassemble for access and air flow from bottom seems good due to the design of the slightly elevated legs.

All panels come off which makes it easy to access everything.

NR200 is a solid sff case and anyone whos built in it can vouch for it. Nothing else more to really say other than the case can fit a lot of high-profile air coolers and often times performs better than most 280mm AIO setups in a sff like this. My only complaint is that the cases top lid came with a missing screw and notch, so it doesnt securely snap on and stay on as well as it should. Also on the left side panel, the magnetic mesh filter thats on the inside was bent. You can clearly see that it was either folded in half somehow or maybe smushed in, because theres a vivid streak straight down the middle. Other than doing some more QC, CoolerMaster case doesnt disappoint.

One of the best cases Ive ever built in - the snap on side covers are so convenient to get in and out and youll have no issues so long as you knoq how to build a PC properly and keep your cables neat!

The CM NR200p max is a good system. I’ve been looking to build a SFF system for over a year now. I finally decided to build one since I’ve been using the MSI TridentX2 (beast of a gaming PC). For anyone thinking twice about this PC, you should get it. I will say that if you never built a PC or don’t like tweaking things multipolar times, you may find building a PC like this stressful. But I can say it really isn’t stressful at all. The AIO in this system is top notch, the PSU is good even enough for the 40 series and we’ll constructed SFF. My specs I have a MSI Z790i edge Wi-Fi motherboard 6000 TridentZ ram 32gb Two CoolerMaster Halo2 gen 2 140mm fans( replaced radiator 140mm) Intel i7-13700k Two Noctua 120mm 15s for bottom intake fans When I first built the PC the temps were my biggest concerns especially for a SFF like this. However after tweaking and watching a few YouTube videos, I was able to get the i7-13700k under good temps. When I first stated I was getting 70-80c when gaming but nothing over 80c. You definitely need to undervolt the i7 it runs hot. To do this, you can simply go into your bios and if your motherboard supports it, use CPU lite load. It’s one of the easiest ways to undervolt. I think everyone starts at default(mode 9). The pc will most likely throttle when running stress test. I switched mine to mode 2(CPU lite load) and one other thing, you must use an aggressive fan tuning. If you have good fans, you won’t hear much when the fans are ramped up a bit.I have attached a photo of my fan curves. Also I can use the mesh or tempered glass with this unit. TG gives me 1-2c temps more but due to my bottom 2 noctua fans and my fan curves I get great temps while gaming. Also when doing regular computer task. Keep in mind, it all depends on what you’re trying to accomplish with your PC build. But if you plan on gaming, web browsing, school work, YouTube or nothing like streaming or 4k editing you should be just find. I did not test the system for 4k editing or streaming but I’m sure the PC would run hotter as those events add more stress to the PC. Just YouTube and you will find how to fine tune your build based on your needs and you should be just fine. For me, this is a great little PC with good cooking exactly what I needed for my needs.

Easiest mini itx build love the case would definitely buy again just buy your back of own screws to my knowledge please dont Quote me but I believe the case takes m3 screws.

Good solid quality, and the included components are all great. The V850 power supply comes with custom length, sleeved cables, which is something you dont get if you purchase this power supply separately. Cooler Master put effort into this and didnt simply rob their parts bin like they could have. Even the Master Liquid AIO they include has been customized with longer hoses that place the pump into the perfect spot. The big question I had before buying this, which I never found an answer for by going over this stores product listing, was if an Intel LGA1700 mounting bracket was included to mount the AIO. Im happy to say that yes, one is included, so all of you 12th or 13th Gen Intel guys wont have any problems. For a pretty small case, this thing can accommodate huge graphics cards. Im running an RTX 4080FE, which is the same size as the 4090FE, and the card literally slid right in. If you plan on using the tempered glass side panel like I am, then I would recommend buying a couple of Noctua 120mm slim fans to mount in the bottom, blowing air up at the GPU. All in all my temps have been great, and Im running a 13600K fully unlocked, with an MSI Z790i MPG Edge motherboard and T-Force DDR5 6400 ram.

Alright, lets be frank. How nasty your build is going to be is highly dependent on how much stuff you intend to shove into this box. Now, to its credit, I did successfully get an AIO cooler, bonus fans, and a full sized dinner plate GPU into it, with some REALLY creative routing. Its not pretty.... but it works. Its a great little box. Its not much for show, but I really like the smaller form factor.

Its a great case as long as your good with wire management