eMylo Smart WiFi Light Switch Wireless Relay Switch Module Remote Control Home Automation Timers Compatible with Alexa Echo Google Home iPhone Android App 2 Packs

Works fine, easy to config

This switch worked for adding on/off capability to our Ring floodlight camera. It saved me the effort of manually installing a switch. By following these steps you can configure all the switches comfortably at your table. You won’t wire it, and then find you have a problem. These are the steps I followed, which really simplified setup. Before doing the steps below, scan the barcode on the instructions, download Smart Life app, install & setup an account. Ensure your phone is on your 2.4 GHz network. You can add your Wi-Fi now or during the switch setup. I suggest doing it now. Prep before running application a) Use a power strip, but DON’T plug in yet. b) Plug in an old cut off extension cord (EC) (preferable one with 3 wires, so you can identify ground & power) c) Connect the Black (Power of EC) to INPUT Red side of switch labeled “L” Load d) Connect the White (Neutral of EC) to INPUT Black side of switch labeled “N” Neutral e) Find a cutoff female plug (FP) f) Connect the Black (Power of FP) to OUTPUT Red side of switch labeled “L” Load g) Connect the White (Neutral of FP) to INPUT Black side of switch labeled “N” Neutral h) Ensure there are no exposed wires. Plug in & turn on power strip. The purple light should be blinking fast. If not, press the black button on the switch until it does. Adding your device a) Launch Smart Life app. Go to Home & select + in the upper corner to add a device. b) Turn on your phone’s Bluetooth c) Click auto scan, then start scanning. It should find & configure your switch in less than 2 minutes. d) If auto scan doesn’t work, then add manually by selecting “Switch (WiFI))” under SWITCH heading e) Use the app & turn on/off the switch. I used portable voltage tester to verify. Pros - Simple to configure if you follow the steps above - Eliminates the need for a manual switch or adds Wi-Fi to an existing switch Cons - I don’t think the instructions are sufficient for an average person without prior electrical knowledge Summary Well worth the money. Highly recommend. Please let me know if this helps

Lo usé para mis bombillos empotrados en la pared y salieron super, funcionan a la perfección con alexa.

I could not get this to work. It kept tripping the GFCI on the circuit. Installation was easy and the setup looked pretty straight forward if it ever got power before tripping the GFCI.

It works great with Alexa

Easy to install and program with Alexa. I would highly recommend this item If you are converting something to a smart home. Im converting my 30 RV to be a smart RV peri installed these on my water pump, exterior lights, Flood lights, On a 12 V system. I highly recommend these items. Cheers

Excellent items

Surprising easy to set up with their app.

Device is bigger than anticipated but it worked for my installation. Set up was very straight forward. They must have worked out the kinks. I also manage to connect to google home very easily. I installed bunch of Lutron Cassette’s home before this device, I would have probably consider more of these which are cheaper than casetta’s

The install went great installed 3 in less than 15 minutes. Had to cut up about 3 cords but in the end it made them smart cords. Had sonoff switches before this, these make me feel a lot better because the high voltage lines dont come as close as the sonoff switches do. The app connects to Alexa perfectly and changing the name of the device on the app immediately changed it on amazons side allowing me to start turning off and on my lights with the correct name.