LIAN LI O11 Dynamic EVO Gaming PC Case E-ATX Desktop Computer Case - Mid Tower Chassis with Flexible Mode and Configuration, Tempered Glass Panel, USB Type-C Port, Easy Cable Management (Harbor Grey)

These isnt much to say about this case that dozens of yt reviews havent already covered. I own the og 011d as well so ill just share a few changes that stood out to me. -The evo glass is lightly tinted. I dont know if this is specific to the silver/black model i have or if they all have tinted glass now. My og 011 (black model) was not tinted at all. -There is room on the back for 120mm fan. Yay -The retention system for the front, and side glass as well as the metal side use a , and forgive me i dont know the proper term, but a tilt and lock type of system. The og panels slid straight down into grooves. Personally i would rather have the drop in system of the old case. It felt more secure. The panels can be secured with a screw (not thumb) however that kinda kicks the tooless aspect of getting into the case to the curb. -The second chamber (where the psu and hd mounts are) feels a little tighter than the old case. I did not measure it but it feels just a wee bit narrower. -Lastly, this isnt a difference, but it is something to note. The front argb strip has some built in effects of course but you can also hook it to an argb header on your mobo. To get it to sync though you need to click the M button on the right side of the case 8 times. This puts it in sync mode. Dont worry if you go to far it just cycles back around.

Took waaaaayyyyy longer to get than was stated at the time of purchase. Try three times as long. Being that it was an upgrade from an older case, it definitely didn’t hinder my ability to use my Pc. As for the case itself, it is exactly what I wanted. Although, fan upgrades are a definite factor for it to look right. So I’m just a couple of hundred dollars away from being able to post a picture. Not worth posting a picture with a bunch of mismatching fans I had laying around.

Todo es de buena calidad y espaciosa. El color gris se ve mucho mejor en persona.

great case. make sure you understand how to build a computer prior to leaving bad feedback. I had to place standoff screws into correct positions because motherboards all do not have the same mounting locations. Failure to do this would result in improper grounding, and worse, you could set the motherboard on a standoff that causes a short circuit. So if you place your motherboard in position and all your screws are finding homes, go ahead and pop that out of there and adjust the placement of your standoffs. oh yeah - and it was just what i needed. great for my space. and was perfect for my project.

I ordered this case for a server build with a lot of hard drives. The case is super configurable, very sturdy, and looks great. Highly recommended.

The case is amazing build quality with plenty of space for big builds and well as mid size builds having the ability to use really any fan layout you choose is nice as well. I will say the power supply bay could be slightly bigger as with an EVGA 1000w the length was perfectly fine however when you start adding all the cables for things you need to power you might need to get that thinking cap on, that said user mileage will vary with that issue as some builds dont require as many cables. The air flow of the case is top notch if you use the bottom as your main inlet for flow the case does come with a nice magnetic fine mesh filter. I would keep in mind that this case does not come with any upgrades like the front mesh kit *Sold Separate (getting that soon for even more airflow). I highly recommend a fan controller as it will make the cable routing 10 times as easy and will alleviate and problems of you running out of fan headers. The last item i would like to point out is this case gives you a fair amount of ways to customize it however screws, screws and more screws so be ready for that. Hope this helps Ive provided images to see space in the case after things are installed Items are as shown ( Zotac 4090, NZXT z73 360mm, Corsair sp140s, Asus ROG Z690-E )

First of all, I cancelled my Amazon order due to a delay and ended up with a unit straight from Microcenter. As such, if you do any serious digging to check on the validity of this review [and you should] therein lies the discrepancy. Pros: Dead easy to build in, amazing cable management. Very forgiving case. optional Vertical GPU bracket for modern GPUs [Trust me, I watched a 3080 warp over 2 years, and its a two slot card. Im not trusting my Red Devil 7900 XT to horizontal mounting.] Cons: Id like to see a same price reversed case sold out of box, insted of having to do it myself [because I didnt, it would have worked better the other way around, but Im not rebuilding the entire unit over it. I didnt go into IT to be productive] Ultimately one of the easiest build cases Ive ever done. If youre not sure why you should get the same build EVERYONE seems to have...... this one isnt based on hype. Make your life easier: Get this case, and stress over anything besides the build working perfectly, cooling amazing, and looking great [ok, that last part is subjective, I *LIKE* my modified Borg Cube]

It’s a heavy gorgeous case, but the chamber for cables and drives is a bit lackluster. If you don’t use unifans and have a bunch of corsair stuff to jam in there, even with the best cable management, it’s a spaghetti mess.

I buy many different cases and try them. I also buy foam crosair very expensive case but in the end I find out about this case I did buy it but I return it because I find it much cheaper from from other seller anyway must say this case is the best case specially if you using one of the new big graphic card like RTX 4070/4080/4990 I think is the best case in the market for High End pc, in my computer i usr rtx-4090 its perfect, Good luck to everyone.

Case is gorgeous in the Harbor Gray I got it in, but I’m sure it looks just as amazing in any other color it comes in. Very easy to install and a lot more spacious than it looks. It can hold my 4090 FE as shown in the pic. It also comes with a lot of extras for any build you might be thinking about. Lian Li is da G.O.A.T. I highly recommend you watch a video review of this case so you know the easy way to take it apart. It’s not very long as it’s very simple to do.