Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Jake
> 3 dayWorks really well
-
Brihno
> 3 dayThis product works really well in terms of thermal transfer. The spreader tool is a great add-on to have with this product
-
Milan Seda
> 3 dayProduct as described, great service.
-
Sebastian
> 3 dayReceived quick and its as described
-
Andrew
> 3 dayQuality product.
-
Brandon G
> 3 dayThe product works as intended, the scrapper made easy work of cleaning off the old thermal paste, the applicator was easy to use, and my temperatures are where they should be.
-
k412white
> 3 dayIt’s very viscous, but manageable. I used this with an air on an i9 9900k. Worked great!
-
Francisco Castellon
> 3 daykeeps my pc cool
-
Eric Kemmler
> 3 dayCPU temp dropped drastically. I assembled this chip about 10 years ago and had to pull it apart to clean dust. This grease is the best.
-
Prof. Kenya Beer MD
> 3 dayBest damn thermal paste around
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
