Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Douglas b Miller
> 3 dayArtic makes the best paste
-
T. Broussared
> 3 dayThe product worked just as stated. Easy to use and the ps4 was up and running the same night as receiving the paste. Tool was really handy.
-
Sergio Luis Salinas
> 3 dayEs practico y facil de aplicar y usar
-
Beth6420
> 3 dayIt worked well, ez to use
-
Jennifer
> 3 dayProduct worked perfectly. Plenty of product in the container for the 2 CPUs I was installing and then some. Some time later and its still going strong. This is my brand of choice so I will def come back for more if Im in need again.
-
MisterTenPercent
> 3 dayThis is a cooling compound - I used it to install a new fan on the AMD ryzen CPU. It was easy to squeeze a couple of blobs on to the CPU and then to pancake the fan to the CPU without any issues. Bottom line - The computer is running cool !
-
MOPAR BLUE
> 3 dayworking so far!
-
Tech24
> 3 dayThe small tube is convenient.
-
Mr. Bevans
Greater than one weekIt works
-
WILLIAM H JOYCE
Greater than one weekAMD RYZEN to FAN conductivity
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
