Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Al Rose
> 24 hourworks=ed as avertized
-
Victor M Valdes
> 24 hourI have used Artic Silver for years and purchased it from many webstores. I build computers from scratch and I always use this between CPU and Heat Sink and it has always done the job. No one has ever had a CPU overheat a system I built. I highly recommend this product for this use.
-
Christopher
> 24 hourSimple OEM packaging, the spreader is a nice addition. Ive used this product before so I knew how, but instructions are just a web search away.
-
Douglas b Miller
> 24 hourArtic makes the best paste
-
Lourdes
> 24 hourWhen you get your cooler, clean the pad off with alcohol, then apply this to cpu and then proceed as usual. Has *NEVER* failed to produce beautiful thermal transfer results.
-
Camryn Wyman PhD
> 24 hourCubrió satisfactoriamente mis expectativas.
-
alex
> 24 hourVery good inexpensive , really good product .
-
Michael Roper
> 24 hourNot much to say about thermal paste but it does it’s job
-
pinkhummingbird
> 24 hourSaved lots of money putting it on my MacBook pro.
-
Ms. Callie Conn DDS
> 24 hourI love this product I use it in all my computer builds
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
