Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Brian P.
> 3 dayI needed a high quality cooler that would fit into a 4U rackmount server case. This one was perfect when configured in the low profile fan setup. Very high quality as you would expect from Noctua.
-
G.E.
Greater than one weekFirst Noctua cooler and very easy to install. One recommendation would be to verify if there are any compatibility with motherboard, case and ram. During the installation in Fractal Design Torrent Nano, needed to rotate the cooler 180 degrees BUT cannot install an exhaust fan in the case due to the size of the cooler.
-
フランシス
> 3 dayWorks great in a SFF case.
-
Colleen Considine IV
Greater than one weekUsed on a AMD Ryzen 5 3600 CPU in a Cooler Master NR200 case. Substantially lower temps on both idle/low load and stress test.
-
MaxxOmega
> 3 dayWorks very well, huge fan and cooling area. I bought a second one for another build.
-
Steve Hamilton
> 3 dayAttached easily to an Asus Z170 motherboard and keeps the temps of an overclocked (4800MHz) Skylake 6700k under 40 C running at about 800 rpm. Very quiet.
-
Lorronie
> 3 day大抵ＣＰＵ付属のクーラーで済ませているのですが、Ryzen3900Xで８０°Ｃ、ファンもゴーっと鳴ってることから、十数年ぶりにクーラー買いました。マザーボード X470 Master SLI ケース Antec nine hundred グラフィックカード MSI GeForce GTX 1660 Ti AERO で、用途はPremiere等での動画の編集です。 NH-U12Aも考えましたが、ケースの大きさが心配で。 取りつけは思ったよりもずっと簡単でした。 若干４ピン8ピンのケーブルが通り道になってはしまいますが(下側にファンをつけたので）、何とかつながりました。 レンダリング中１２°くらい下がった感じで、まあよいのではないかと思ってます。音はものすごく静かというわけではないように感じますが、このケースなので他のファンの音と混ざっているから・・・少なくても「ごー」ではないので、よいかと思ってます。夏場になるともう少し厳しいのかもしれません。
-
Sharon
> 3 dayWorks great
-
Gus.TX
> 3 dayAverage Temperature of CPU dropped ~10F with this cooler. Absolutely quiet as well.
-
On Go
> 3 dayI decided to go with a top-down cooler for my mini-ITX build (ASUS STRIX B550-I) to cool my Ryzen 7 3700X, as well as provide airflow to the motherboard in a small form factor case (Cooler Master NR200). This certainly does just that, but beware of the rather cumbersome cable management that comes with this because of how the heatsink gets in the way of accessing some motherboard I/O and power connectors.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
Related products
