Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Jozeph
> 3 dayIf youre dead set in using the Silverstone GD09 HTPC case, then this is the best air cooler you can get. This case doesnt support water-cooling radiators, I think they have a newer case that support it.
-
Kip Kshlerin
> 3 dayEasy to install, keeps 8700k cool with little effort. Fan is pretty quiet on it. Ability to have the fan mount above, below or both is great for tall ram or smaller pc cases
-
Wells Bengston
> 3 dayI went with the NH-C14S due to advertised limitations on cooler height with my Cooler Master Silencio 352 mATX case. I found out later that a taller cooler may have fit, but I dont regret the choice.
-
BlueCarbon
> 3 dayEvery CPU cooler I have ever purchased came with a back-plate, even coolers much cheaper than this one. This expensive cooler does not! They expect you to use the old back-plate that comes with your motherboard. Thats all fine, but my previous cooler is a Cooler Master Hyper 212 EVO which is a great cooler, but I have my old back-plate in storage someplace and it would be a nightmare to locate. Why not just include a back-plate like everyone else? They include an Intel back-plate, but not an AMD. I had to go to the hardware store to jerry-rig it to work. Aside from that, this is a good cooler, although overpriced. The reason I wanted this cooler is so it will cool the VRMs and northbridge.
-
Ben
Greater than one weekWarning of the height (158mm if you install fan on top)
-
A L
> 3 dayMy second noctua cooler, excellent quality and function well. Come with all the tools, making installation a breeze.
-
Brent Kimball
Greater than one weekWhats to say.
-
Reviewer with Integrity
Greater than one weekQuiet and performance is great
-
Peter Stevens
> 3 dayFitted well in the cooler master NR200P case, although my current setup is a 65TDP chip, the cooler keeps it below 60 degrees when fully loaded with Prime95.
-
> 3 day
I am using this on a 2700X CPU and a Tomahawk B450 Board and right now it is running at 105 degrees F ... It is quiet but then again I am not a gamer but it seems to do the job ... even when my CPU is maxed out I have only seen the temp. in the 120 Degree area, wish I could say the same for my GPU ... but it is a older one, to be replaced soon... If you have a M/ATX case it wont fit, I can tell you from experience ... one way it gets interfered with by the Blue Ray Drive and the other way by the rear fan... it is a big unit ... I see people complain about the colors of the fan, if that is the case order a 140MM that you like but I really like a quietness and I have maxed it out.... You can mount the fan on the top or on the bottom and yes it clears the memory .... Hope this helps guide your decisions ... I am really beginning to think on these reviews that some people just like to downgrade everything ... I am happy with everything in my system
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
Related products
