Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)

(0 reviews)

Price
$67.16

Quantity
(10000 available )

Total Price
Share
186 Ratings
151
21
5
5
4
Reviews
  • Scotty

    > 3 day

    Im using this with the fan under the heatsink blowing down onto the motherboard. My V750 SFX PSU is mounted to the front for neater cable management and cooler clearance. Im using Corsair CMK16GX4M2Z3200C16 memory. Plenty of memory and motherboard clearance. I scavenged a NF-A15 off my old NH-U14S cooler as a push fan. Running SOTTR benchmark 3 times on ULTRA settings, the CPU temp was no more than 57C with an ambient 22C (CPU fans set to silent in BIOS). Im still finalizing the build and will likely replace the NF-A15 with a NF-A14 PWM fan, since the A15 has half the air flow as the A14.

  • JP

    > 3 day

    Trident Z Neo/RGB will fit even with the fan mounted on the bottom!

  • Taylor Morseau

    > 3 day

    Went through 2 other coolers before landing on this one, returned because they were too large. This was exactly what I was looking for in a mid tower build. Great product!

  • L

    > 3 day

    Used with high end i7 processor. Concerned about the height because i had to ship th esystem after it was built, but no issues. It screws down to the motherboard vs snaps which is good. There is some flex if you need to bend the pipes a little. One thing to note on my Asus motherboard, it does block 2 of the memory banks. So i had to install before i put on this cooler. Other than that A+

  • jonathan del bianco

    > 3 day

    =)

  • > 3 day

    I am using this on a 2700X CPU and a Tomahawk B450 Board and right now it is running at 105 degrees F ... It is quiet but then again I am not a gamer but it seems to do the job ... even when my CPU is maxed out I have only seen the temp. in the 120 Degree area, wish I could say the same for my GPU ... but it is a older one, to be replaced soon... If you have a M/ATX case it wont fit, I can tell you from experience ... one way it gets interfered with by the Blue Ray Drive and the other way by the rear fan... it is a big unit ... I see people complain about the colors of the fan, if that is the case order a 140MM that you like but I really like a quietness and I have maxed it out.... You can mount the fan on the top or on the bottom and yes it clears the memory .... Hope this helps guide your decisions ... I am really beginning to think on these reviews that some people just like to downgrade everything ... I am happy with everything in my system

  • David Ziegler

    > 3 day

    This is a FANtastic product from a FANtastic company. Everything from the motherboard mounts to all the little things included such as a extender for the fan power and a tube of thermal paste. I had a couple of questions and their Customer support staff is AWESOME!

  • Stephen Douglas Otto

    > 3 day

    Installed this with an Intel Quad Core i7 processor and then tested out how well the system holds up with a really good OC (over clock) ..... Wow the system does NOT heat up at all even under a really tough OC ..... take a likin and keeps on tickin ... glad that I got this as I normally do water cooling for extreme OCs but this Noctua is incredible and now I highly recommend it to anyone!!!!!

  • Michael

    > 3 day

    Fits NR200 perfectly. Silent and efficient like all other Noctua coolers. Ordered another one for a second PC.

  • SCrashNeT

    > 3 day

    Es extraordinaria la calidad de esta marca, y me llevé la sorpresa que era compatible como lga1700 aunque la descripcción no lo menciobaba...

NH-C14S HeaderNH-C14S Header

Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.

NH-C14S Low-profileNH-C14S Low-profile

NH-C14S High ClearanceNH-C14S High Clearance

NF-A14NF-A14

a14a14

Low Profile Mode

Run with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases.

High Clearance Mode

Run with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height.

NF-A14 140mm premium fan

Featuring sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14.

NT-H1 thermal compound

Noctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.

c14c14

C-Type top-flow design

The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.

NH-C14SNH-C14S
Measurements
  • Height (without fan): 115 mm
  • Width (without fan): 140 mm
  • Depth (without fan): 163 mm
  • Height (with fan): 115/142 mm
  • Width (with fan): 140 mm
  • Depth (with fan): 163 mm
  • Weight (without fan): 820 g
  • Weight (with fan/s): 1015 g
Material

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 1x NF-A14 PWM premium fan
  • Low-Noise Adaptor (L.N.A.)
  • Fan clips for second fan
  • NT-H1 high-grade thermal compound
  • SecuFirm2 Mounting Kit
  • Noctua Metal Case-Badge
Socket compatibility

Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5

Related products

Shop
Kim's Store
Kim's Store
( 0 reviews )
Visit Store
Top Selling Products