Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
M Remo
> 24 hourIt fits like a glove when you need a low profile, premium air cooled heatsink. This fit just barely in my Corsair Air Carbide 240 MATX cube case and on a Gigabyte GA-Z170MX-Gaming 5 MATX mobo. I had to mount the fan on the bottom side to meet the clearance of the case, but if you have more space, you could add a second fan so that there are dual fans in push-pull config. I have it cooling an I5 6600K which is currently OCd and with Prime 95 running, Im still under 60C.
-
Katrine Hilpert
> 24 hourCPU:Ryzen 9 5900X
-
Wells Bengston
> 24 hourI went with the NH-C14S due to advertised limitations on cooler height with my Cooler Master Silencio 352 mATX case. I found out later that a taller cooler may have fit, but I dont regret the choice.
-
L
> 24 hourUsed with high end i7 processor. Concerned about the height because i had to ship th esystem after it was built, but no issues. It screws down to the motherboard vs snaps which is good. There is some flex if you need to bend the pipes a little. One thing to note on my Asus motherboard, it does block 2 of the memory banks. So i had to install before i put on this cooler. Other than that A+
-
Jack C.
> 24 hourFits AM4 sockets
-
Stephen Deno
> 24 hourWorks great! Brought my cpu temperature (ryzen 3700) down from 82-83 C under stress test to 74-76 C.
-
Steve Hamilton
> 24 hourAttached easily to an Asus Z170 motherboard and keeps the temps of an overclocked (4800MHz) Skylake 6700k under 40 C running at about 800 rpm. Very quiet.
-
Milo
> 24 hourPut on an Intel i7 11700KF, 125 tdp. Stressing cpu runs at 60C max using 105-110 watts. Normal usage runs 34C to 43C. Idles at 26C. Happy customer, didnt get anything as low or stable using AIO water coolers. Install was easy enough as long as you follow the instructions. Fan is quiet, havent been able to get it to go over 50% yet. Board temp good to, only 26C. Might not be as pretty or cool as the AIOs but Im more into protecting my electronics.
-
C. Hazard
> 24 hourMost people looking at this already know what theyre buying, have done the reading ,etc.
-
Don
> 24 hourSolid Cooler for more low profie builds. Cool and quiet low maintenance proposition compared to liquids coolers. As I swtich to this cooler after my H80i losing liquid over time due to evaporation.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
