RVLock V4 Key Fob and Keyless Entry Keypad, RV/Motor Home Door Lock Accessories, Upgraded Full Metal Lock
-
John
> 24 hourIt works very good
-
Steven Lee
> 24 hourI use the find the right lock feature from RVLock web site. It was easy. There are always doubts as to weather you got the right one. It arrived and I followed instructions. It says ten minutes but that might be pretty aggressive if your not handy. The only thing I was surprised by is that there was no Zero or Nine selection to be had when setting your discount code. All in all everything went great.
-
JT
> 24 hourThis product was so easy to install. Only took me a couple of minutes. The door shuts and locks better than the previous lock. The lock itself is metal and feels very substantial. So far Im very happy with this purchase.
-
Ms. Carlie Turner V
> 24 hourWorks great and easy install. Great not needing a key anymore. Took a little longer to install than advertised.
-
akamistyeyes
> 24 hourEasy installation. Easy programming. This will keep my keys in my pocket where they belong.
-
M. Killough
> 24 hourThe product itself is excellent. Quality all metal construction. Feels solid in your hands. Programming the keypad and key fobs was very simple. The real issue came when removing my existing handle. For the life of me, I could not get the plate around the existing latch and deadbolt off. Tried and failed repeatedly with my screwdriver. Then read, the manufacturer of my door may have used an adhesive, such as Loctite, to secure the screws. Read further to find a heat gun or solder would be necessary to heat up the screws and loosen them. Went and bought a soldering tool heated up the screws, but still could not get them out. Tried so hard that I eventually stripped the screws. Then went and bought a screw extractor from the hardware store. It was worthless, didnt work at all. Finally, I just decided to drill out the screws, but the screws were stainless steel, so I needed to buy a Cobalt bit. Bought a 1/4 Cobalt bit and EUREKA within a few minutes I drilled away the stripped screw head and the plate fell right off. This is no reflection on RVLOCK, the product itself is great, just a warning that if indeed your current handle manufacturer didnt go overboard in how their latch plate is attached, this install may very well take only 10 minutes. If however if your current handle was like mine, it could take you two days to install as it did me. Product is excellent but install times may vary.
-
bob d ankeney
> 24 hourLock installed easily
-
Kelly carter
> 24 hourReceived this unit on time. Seems good so far. I have to say that the code isn’t the way the video shows. You in my experience is if you reset the code by the button by the lever and then set your own code it works the best. Also I had to buy some silicone to water proof the exterior of the lock to the door because it’s not a perfect fit. So there is another $15 cost. Also the screws that come with the unit aren’t very strong so I snapped one in the hole and had to drill it out and replace it. So just be gentle. All that said, so far so good.
-
Becky Rupp
> 24 hourThe latch fit and installed easily works great easier to open and closed in my original jayco block. Very easy to program. Installed in 10 minutes.
-
Harry I.
> 24 hourEasy to install. Simple to program. Great upgrade for you RV