Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

Installed this on my Asus Maximus Z790 Hero with no problems. Used factory screws from motherboard and no issues. Make sure to tighten in criss cross pattern to make sure it tightens evenly and doesn’t bend. Highly recommend as this also lowered my CPU temps on my 13900k

Rather easy to install, I removed the motherboard from the case, and removed all my RAM. It might be doable without taking the motherboard out of the case but I didnt want to try it.

Excellent product.

When I bought my i7-13700K, the CPU would randomly spike to 100 °C while idle and stay at that temperature for 4 to 5 minutes. I upgraded my CPU cooler to a corsair 420 mm CPU watercooler, but the same issue occurred, although it didnt stay as long at 100 °C. The problem disappeared when I switched to the Thermalright contact frame. I also noticed an improvement in the average temperature of the CPU at idle and under load. It is clear that this contact frame helps the CPU behave in a better way, especially for a CPU that is known to overheat.

I used this on an Intel Core i7-13700K with an ARCTIC Liquid Freezer II 420 for cooling. With the stock frame a few of the cores kept spiking over 100C under load, forcing them to thermally throttle. Since the same cores were overheating every time, it seemed like the CPU wasnt properly mating with the cooler, which is exactly what this product is designed to fix.

Dropped an average of 15C after I replaced the stock CPU bracket on my Gigabyte Aorus Elite AX. This fit very snug and secure on the 13th Gen i9 and I couldnt be happier!

Works. Got my temps down a little bit.

facil instalacion y cumple su funcion

13900k/Liquid Freezer II 360/Z790 Aorus Master - no improvement in temps unfortunately. Well built and easy to install however.

Look I realize Thermal Grizzly basically thought of these as a solution for the 1700 socket bend but they’re super expensive and hard to find in the States. And yes, there are even some builders that believe these contact frames are just a trend and are nothing more than a security blanket for a nonissue. And in same cases that’s absolutely true. Some CPUs IHS are perfectly fine with the socket bend I had 4 that were completely fine with or without the contact frame. But after 15 builds with extreme socket bend making for poor contact with heatsinks I can say this helps more often than not. This contact frame has lowered temps by upwards of 8C on my builds and yes I tested each one. So yes, in my professional opinion Intel created a problem, never addressed it and these are the best solution, especially for anything Core i7 and up. The fact that Thermal Right created these at such a reasonable price and are indeed just as effective as Thermal Grizzly’s (check Gamers Nexus) seems too good to be true, but as I’ve said I’ve used these on 15 builds and they’re worth every penny.