Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

I didn’t notice a change to my thermals, but it makes my install look cleaner

I was a little nervous about installing this at first, but it was surprisingly easy. I placed it on my 17-13700K CPU and I noticed my temps went from Mid 40s to high 30s while in windows, and when running Cinebench I went from low 90s to mid to low 80s. Overall highly recommend if youre comfortable with taking apart your computer. Takes less than 10 minutes.

Combined this plate with a very slight undervolt on my 13700k and now its maxes out around 85C as opposed to thermal throttling before. 100% these plates are essential for keeping new Intel cpu temps under control.

Purchased this for my first Intel build ever. I installed this after using the stock bracket and seeing some relatively high temps. A quick search of Reddit brought up many recommendations for this, so I picked one up. It’s reduced the max temp on my 13700k from around 90c to about 85c with my EK Nucleus 360mm AIO. Definitely worth the cost IMO, even came with free thermal paste. I didn’t use the paste, but it’s a nice touch for sure.

Easy to install and help with thermals

This is my first build in 4.5 years, so this time around I wanted to do tons of research. Im installing a CPU water cooler for the first time ever and researching that a fair amount led me to these CPU brackets. Ive never been satisfied with the cheezy, light weight CPU brackets/fasteners which come standad on MBs. This seemed like a valuable asset for just $14. Im running a 13th Gen Intel on an MSI Z690 ACE MB. As you can see from the pic, the fit looks very clean and the aluminum bracket is well machined. I do not know if temps will be lowered vs the stock guillotine bracket but it sure holds the Intel in place far better. And that can only be good.

Works. Got my temps down a little bit.

13900k/Liquid Freezer II 360/Z790 Aorus Master - no improvement in temps unfortunately. Well built and easy to install however.

Corrected a warp that caused uneven cooling. Works great to properly secure the processor and allow for proper mounting of a cooling solution. Made from aluminum not plastic. Remains straight under pressure.

Was skeptical at first even after watching all the videos online about this but it really worked, dropped my temps by about 5-7 degrees on both my 12th and 13th Gen CPU’s. Recommending this to all my friends!