Thermaltake V-Tubler PETG Tube 16mm (5/8) OD 1000mm 4-pack

As others have mentioned, the tubes are not separated frim each other for shipping, so prepare for scratches. However, due to their low price, they were perfect for me because Im new and expected to fail a lot of bends.

I ordered 2 sets of tubing, and one came in with individual tube sleeving and the other 1 sleeve for all 4 tubes. The individually sleeved ones looked great, but the other tubes were absolutely covered with scratches. Youre basically spinning a roulette wheel with ordering these, Id recommend against it.

Great for longer runs tubes come with no scratches in them. If you dont already have you will need a silicon bending insert I purchased a alphacool 12mm (1/2) ID that work good to prevent kinks.

Worked out great, and price was more reasonable than some other brands that were available and half the tubing. Pipe was very easy to bend, as long as you dont use a too high temp you are fine. You are able to reheat a tube if it did not turn out right, but you have to be careful as you can warp your bend even more.

Soak your insert in pure olive oil before you put it in the tube and heat the tube. That tube compresses the insert, no lubrication and you will not be able to pull your insert out! I tried some spray oil, but it contained water and fogged up the inside of the tube. Pure olive oil has 0% water, thus, no fogging. Also you can mark where to bend your tubes on the insert with a pencil mark. Just rub off the pencil mark easily.

This is as sexy as they get. Put some curves on your PC today. They dont leak all over your stuff, they bend easy and look stunning in any color you put in them. Go big or go home.

Long , wow

Nice tubing overall, easy to work with.

Just finished my build and I used the thermaltake PETG tubing. It is easy to work with, love the fact that it comes in 1 meter length but extremely disappointed by the fact that all the tubing has scuffs on them. I bought and used the Thermaltake RGB fittings with clear coolant and for a brand new build it looks old because of the scuffing on the pipes. Happy to pay extra $2 and have each tube packed separately otherwise it is a complete waste of money. Now Im looking at buying EK tubing because they are packed separately.

Good tubing - cuts pretty easy and doesnt bubble or warp at all if you are careful. I like how tight you can make bends with this stuff.