2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
Emre Tortulu
> 3 dayIst sehr gut
-
INES H.
> 3 dayPasst!
-
thqrb bdye
> 3 dayworks well so far. You have to experiment with location in your home to place it to get the best signal. The MSP hook up worked fine
-
KIMBERLY
> 3 dayWork better than expected. Range is good. My house is now well cover with this extender. Easy to set up.Easy too configure. I love the lighted center so you can tell when the signal drops.
-
CHRISTINE
> 3 dayWorks very well at our campground where the campground public router is about 300 away. I get a very strong signal from the TP-Link. Very pleased with it!
-
PATRICIA
Greater than one weekSeems to get service interruption quite frequently, but when it does work, it does a great job of extending our wifi coverage throughout the rest of our tiny house. Really best pretty easy to install . I watch Netflix with no laggs but it laggs on my Playstation 4 is ok though it works with my Netflix really great .
-
ALBERT
> 3 daySolved out two story problem of wifi dead spots and extremely easy to set up for a non techy person. Would recommend to anyone needing to fix a dead spot.
-
KEITH
> 3 dayEasy to install. Easy to conect and perfect service. Very good quality as wifi range extensor. Maybe Too bright lights for night
-
Hans Klein
> 3 dayläuft bis jetzt ohne Pause perfekt. Die Datenübertragung geht schnell und die Verarbeitung ist auch gut. Zu dem Preis nur zu empfehlen!
-
JOYCE
07-04-2025My kids complained the wi-fi was no good in their room. Purchased this for them. Read some reviews about it sometimes being complicated to set up to the modem. But when it arrived in the mail, my 12 old son had it set up in about 2 minutes. He said it was really simple to set up and now both kids have good wi-fi reception in their rooms. My son said the instructions are not in english so it must have been simple to install.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.