acegoo RV Boat Recessed Ceiling Light 4 Pack Super Slim LED Panel Light DC 12V 3W Full Aluminum Downlights, Warm White (Silver)

Tried both the WARM and the COOL versions. For my needs, I found I need something in between the two. The Warm is near the warmer end of the scale while the COOL gets close to blueish white territory. I ended up going with the Cool for my project as it better matched the LED strip I had. This was used in conjunction with a 12V dimmable transformer brick for under cabinet lights. My LED strip was under the cabinets and these puck lights were to light up the open display cabinet area. Installation was easy (two wires) and the lights sit flush into the hole.

Simple pop in lights with a good white crisp color, spring mounts worked perfectly. Used in hollow floating shelves for hidden lights. I used a led power supply to drive them.

These lights are great looking very easy to install. Excellent as far as the amount of usage compared to the brightness. They have a color coded 6 inch pig tail making installation fast and simple. I use them with a small 12 volt solar set up i have and they are nice and bright for there size with very little draw on my batteries. No inverter needed.

I utilized the lights for downlighting on my kitchen cooktop. I did this by cutting a custom aluminum plate with holes to mount the lights. I also installed a light switch and dimmer in the panel. The light housing ring easily screws off so it could be painted black to match the panel. The lights provide far greater light output as compared to most range hoods. I have had the lights for over two years and have not experienced any failures. Light intensity, color, quality and reliability are all very good.

I bought these to replace the bright, cool white light over the bed in our RV. That light was way too bright when your eyes are used to the dark. I put 4 of these in the base of the shelf at the head of the bed. I used this dimmer https://www.amazon.com/gp/product/B01C4UBMY6/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 on each corner of the shelf to control two of the lights on that side. This was a huge improvement to the lighting situation! The hole needed is 2-1/4 (57mm). The springs are quite strong so there is no chance they will bounce out or move around once installed.

I have these in my rv and they work as expected