ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Mike
> 3 dayEasy to spread also keeps the temps really low which will save cpu in long run
-
Thu Tran
> 3 dayIt works really well! I even used it on my other computer builds! Very easy to use!
-
Mike
Greater than one weekMy Xbox Series S was constantly shutting down due to overheating. The factory paste was not even covering the APU. This thermal paste worked perfectly and the Xbox is running smooth again!
-
Mochi
> 3 dayI wanted to update my processor to a i7 4790 from an i3, and from the reviews, this processor really heated up for them even with a decent fan. I dont have a great amount of money to spend, so I wanted to get a good thermal paste and save up for a cooler later on. Installed the processor and have been using it for about 4 days with no issues AT ALL! Pc idle stays from 20c to 27c, and while in use it only goes to a max of 35c, which is great imo considering I have a bad and little fan! I dont know much about computers at all so take my review as a grain of salt, but I think the results are great by keeping my new processor at bay and cool.
-
Carol_Brii
> 3 dayBueno
-
Dave
Greater than one weekThermal paste
-
Jason Y Liu
> 3 dayI used this with the spatula spread method on my gaming laptop and my max temp dropped from 95c to 71c. I only wish I knew about this earlier.
-
Vahan
Greater than one weekBrauchte nur nen Tropfen, funktioniert gut.
-
Antony
> 3 dayNot much to tell. Does what intended, and well. My computer has always been a bit loud (probably down to my graphics card), but after giving it a deep clean and replacing the thermal paste it now works well, and I can actually play games again without the constant frame spikes, so you can count me as a happy nerd!
-
CajunWaffles
Greater than one weekGreat stuff and lasting!
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
