Kasa Smart HS100 WiFi Smart Plug, Classic 1-Pack, White

<Update 6.20.2016> I love these units & cannot wait (though Im going to have to anyway) for the HS200 TP Link Smart Switch (In-wall light switch) to come to the market per their latest software update note under the Whats New. Ive had my first TP Link Smart Plug (see the original post below) for about 6 weeks now, my second for about 4 weeks & they are working flawlessly. As mentioned in my OP, I wanted a unit for my entertainment center & have since received & installed it. Drove my college student (whos home for the summer) nuts as the power was not on in the mornings. For the 4 weeks since having the second unit (I called it the TV power), she could not figure out how to get power to the TV. She finally unplugged the power strip from the smart plug & plugged it directly into the wall below the HS100. So I finally showed the family how to work them (mainly just so they wouldnt keep unplugging & plugging in the power chords). On another note, I finally received my Amazon Echo (just in time for Fathers day, wahoo!) and so I now have the Smart Plugs hooked up to the World Wide Web, the Internet super highway, the Internet of Things, etc., etc. I understand the frustrations some people have posted regarding the connection to the Echo & I believe I have figured out why. Amazons Alexa App is in need of some serious TLC. TP Links Kasa App is doing what its suppose to do. In my original post, I had a small issue with connectivity of the software to the units which still exists but not near as rough since the latest software update. Still, when youre not connected to your LAN (because youve been away or simply have the WiFi / Data off) & want to adjust something in the schedules or simply turn the lamp on, connecting wirelessly sometimes has a hiccup. Each unit has to ping constantly (every 1.5 to 2 seconds as it was explained to me) to your LAN to let the router know the unit is there. When you connect your phone to the LAN, you may just connect in between those pings in which case the software on the phone may come back & say There are no connected devices. It does offer a pre-configured devices ribbon which you can select to initiate the units connectivity through the smart phone (see the uploaded pics). After selecting the ribbon, you have to select the little plus button on the right of each device until you have the no unsaved devices screen, then your units are active for you (5 stars now that I understand the software & realize that most of the frustrations are not the fault of TP Link). After I finally created an account with TP Link (all you need is an email address & a password, no personal information is required) I went back into the Kasa App & set the first unit to remote. In the Alexa App, I had to select the Skills in the menu & do a search for Kasa (there are over 123 PAGES of skills & no file management system in the Alexa App). After getting Kasa as a skill & initiating it, I then had to go to the Smart Home in the menu & select the Kasa skill to find the HS100 Smart Plug. This is where the frustrations started for me. The skill was not there. I know I had found it & selected the skill & initiated it but it was not listed. So I went back to the list & did another search for the Kasa (its on like page 71 & each time you go into the list, it starts on page 1). After the third time & about an hour plus, I discovered a search box where I could type the name Kasa & search & it would find about half a dozen skills to choose from, duh! What an idiot. Lucky we have the skills name otherwise its a page by page search until you find what your looking for. Anyway, I digress. The skill was not showing up in the Alexas Smart Home directory. I was about to put the phone down & walk away before something got seriously injured when I realized I had a couple updates to finish on my phone. One of these updates was a 34 megabyte update. Ive read that if you have a decent size (dont ask me what decent size means, I figured 20 meg or better) update, you should reboot your system after updating. So after my update I rebooted my phone & figured ok, Im cooled down a bit, Ill try the Alexa App one more time. Opening the App, I went straight to the Smart Home directory & whadyaknow, the Kasa skill was there. Finally, a step forward. Opening the skill, I can now (finally) have the Kasa skill find the HS100 Smart Plug. Picking the find devices gave me an immediate you have no internet connection message. Then I walked away! This is a long story but I promise it has a happy ending (well, sort of). A few hours of thinking about it I came back to try again. I figured perhaps because the HS100s connect via 2.4 GHz & the Echo connects to the more active 5 GHz, the two are not communicating. So I purposely connected my phone to the 2.4 GHz, opened the Kasa app & verified I could connect to each of my Smart Plugs. Then while leaving the Kasa app open, I went back into the Amazon Alexa app, into the Smart Home directory, & picked the find devices once again. The you have no internet connection message immediately popped up. So I figured the only way I could find the skill to begin with was to reboot the phone so I rebooted once again. I forgot to connect to the 2.4 GHz & open the Kasa app to verify my units were accessible, I just went straight to the Alexa app and after picking the find devices button it came back with a message, searching for devices. This can take up to 20 seconds. Wahoo! It worked, I found my HS100 named the Lamp. Now there are three ways of turning the Lamp on. I can say Alexa, turn on the lamp and Alexa says, ok and the lamp comes on. I can push the power button on the front of the unit and the lamp comes on. And I can wait for the scheduled time and the lamp comes on. These units are AWESOME!!! Of course I had set only the Lamp to remote in the Kasa app so I had to go back to the Kasa app & change the TV power to remote so I could find it in the Alexa app. I had to go through rebooting the phone a couple more times to get my second unit connected with the Echo but I am now connected & my college kid is happy to say Alexa, turn on the TV power so she can watch a movie instead of getting a summer job, ggrrr! ____Original Post____ This is a true product review & I paid full price for the TP Link Smart Plug (HS100, no Energy Monitoring) unit. So with that said, let me tell you my current thoughts on this product after playing with it a mere four days. I dont yet have an echo (its on order) but am preparing for its arrival. So in the mean time I figured Id try this on my local LAN before submitting my so called Smart house to the wiles of the internet. The unit itself is easy enough to work with. You can use it as a single outlet power switch & simply push the button to turn it on and off, much like a six outlet power strip with a switch, but this would be a single outlet. But I want a timer control switch that will automatically turn on at a certain time & off at a certain time & I want to (in the future) have that timer & simply override it with a phrase, Alexa, turn on the lamp. So I needed to connect it to the LAN for starters. After following the instructions for downloading the software (Kasa for Mobile) from Google play I began my assault. My phone automatically connects to my 5 GHz WiFi so I had to manually change it to the 2.4 GHz as this frequency is the only one this Smart plug will work with currently. Reasons are listed on the website (tp-link.us) Now there are two buttons on this unit; a small button on the very top with a light grey gear icon on it is for its configuration (visibility) when connecting to your phone via the local LAN and the other button in the front just above the outlet is a two tone LED light/power button. This is the button you push to simply turn the power strip on/off. This button flashes orange/green when you first plug it in which tells you its ready to begin the connection phase. The app found the plug pretty quickly & began asking me the questions needed to control this plug like what to call it (important to name it something unique to the situation). I called it the lamp. What, Its the only lamp in my family room & I dont intend on connecting any other lamps in the house to the Echo so ... Alexa, turn on the lamp will work very nicely. I can go back & change the name of the plug if I need to. The app then asked for the password to my LAN so my phone can connect to the plug. This is where I screwed everything up cause I couldnt remember what the password was. After resetting the plug a couple times (I now know the reset button works) I got the unit setup & the lamp was on. The software, while easy enough to understand is a bit too simplistic in its presentation which leads to a little frustration in finding what you are searching for. Lemme esplain. I wanted the plug as a timer so I needed to get a schedule setup. You need to tap on the lamp on the left side of the apps screen as the right side is the power switch for controlling the plug via phone. Then you have to pic the three little dots to open a menu so you can pic the schedule selection button. I suppose this is necessary cause if you have several plugs, you will need to determine which one you are working with and there are a few options in menu as well. So I set the schedule for an early morning on & mid morning off, Monday thru Friday. Then created a second schedule for Sunset on & late evening off, Monday thru Sunday. Now mind you this is connected to the local LAN which means if you want a current Sunset time, you have to have your phone connected to the unit to get it as the current Sunset changes daily & the unit needs a connection to the Internet to get that time. Duh! No wonder the lamp was coming on early, the Sunset time was current when I programmed it but is now later than when the lamp comes on as my phone is not connected to the LAN to feed the unit the current Sunset time. :-P A bit of a frustration is when you have a cloudy or stormy afternoon & it gets dark well before sunset. So I wanted to override the current setting & turn the lamp on. Well low & behold when I opened the app, it said there were no current devices configured, would you like to configure one now? Then a little popup display said You have had a previous unit configured which you can access after setting up a new device. After several minutes of getting out of the app, going back in, getting out, disconnecting the phone from the LAN, reconnecting, disconnecting, rebooting the phone, reconnecting, I was ready to unplug the unit & plug the lamp into the wall socket. I thought, All I want to do is turn on the lamp. How lazy am I that I cant reach up and turn the knob, I have to have a Smart Plug. BUT, I wanted the Smart Plug for the timer function. So I was going to Add Device for the fourth time. After picking the Smart Plug icon & giving it a name (the lamp, how original) the app found my previous device & the schedule I was able to turn on the lamp (losing 1 star for this). Havent had an issue with it since but its been a mere four days. On another note, I want to comment on others posts regarding this unit. There is a question/post about why it will not turn on a TV. Unless you have one of those old tube style TVs with a manual toggle switch that you can keep in the ON position, this will not turn on a TV. This Smart Plug is designed to simply deliver power to the TV. As I mentioned earlier, in its most basic form this unit is a one outlet power strip, that is all. The specifications of this unit are for a 100-120 Volt AC outlet with a 15amp load maximum. I have not overloaded this unit to see what would happen but my current wiring for my entertainment system (TV, DVD Player, Wii, etc) are all on one six outlet power strip on a 15amp breaker & they have not tripped the breaker yet. With that said, there is a lot of residual power being leaked by these devices while in a dormant state. I plan to order another TP-Link Smart Plug and schedule a time for these devices to receive power so they can be used. They will be off during the night & when Im away from the home, powered when I am home so I can use them. Another post or two or four mentions this unit is large & covers both wall outlets. While technically this is true, this is also technically not true. This unit has a lip on the back side where the prongs plug into the wall. A standard two prong plug can fit nicely under this unit & both seat perfectly (see the pics I loaded) while anything larger will not. You just have to plug the two prong plug into the bottom outlet first, then plug this unit into the top outlet. In the pics, I have my iClever 6 port charging station plugged into the bottom outlet (need constant power to a charging station) & the lamp via the Smart Plug in the top outlet.

Awesome! This plug is working swimmingly. I have only just got it since its already been compatible with Amazon Echo. I would have been less thrilled if I was dealing with the extra steps to make them talk. At first, it set up with ease. I assumed I had to install the app first and set up the plug before trying to sync with Echo, but it became a little bit of an issue. I set up the first plug with both, then started adding other plugs. The new plugs had a lot of problems being found by Echo and even the Kasa app would keep renaming them to the first name I chose instead of the changed named when the app would turn on. The old names would flash and then change to the new ones. I noticed that the one plug set up with Echo was also still showing the old name, while the Kasa app kept showing the new name. (Example: Lvn Rm Torch Light versus Torch Light). SO, I forgot all devices on Echo, uninstalled Kasa, reinstalled it, and bam. All plugs showed up, showed up with new names right away, and were all found on Echo first try. I may only have needed to sign out of my account on the app and resign in versus the full uninstall, but Im thorough. My suggestion is to plug all the plugs in where you want them before ever starting up the Kasa app the first time, so they all go in at once and you dont have to do the dance with later pairing. Im sure its only going to get better as time goes on with how newly integrated these are. I am very pleased!

I have a water well and one year the outdoor plumbing from it froze. We had no water pressure when that happened because the part that froze was a 2 inch section of pipe that had the pressure sensor on it. You cant buy heat tape for a 2 pipe! The well tech said to insulate that pipe and place a heat lamp near that pipe, turning it on when it gets close to freezing. That involves clamping a heat lamp near the pipe and running an extension cord from the well head to my house, turning it on when it gets cold. It rarely stays cold enough during the day here, but it could happen. But what would I do if I was not home? This WiFi smart plug will hopefully be the answer. Basically, this is a WiFi relay/switch. You download the app, plug in the device to a wall outlet and the app connects the plug to your home network after you supply your routers WEP code. You next specify when the device will turn on. Generally, accessing the device turns it on. The icon on your smartphone Kasa app will turn green. You can have it turn on and off at a certain time on a specified day of the week but not on a specific date on the calendar. By doing so, it acts like setting a smartphone alarm. It asks for your location for sunrise/sunset information and can turn on the device at sunset, etc. There is an option to turn on the device for a low temperature situation, which I assume means outdoor temperature, but there is no setting for what that temperature is when it will turn the device on or at what subsequent temperature will it then turn it off. What if there are conflicts between the set schedule and the temperature? I will have to ask the company about that. In the meantime, I can check the weather and turn it on an off remotely. How long does it take for the smart plug to turn on or off when using the app? It is almost instantaneous. How far away is the smart plug from my Comcast router? About 80 feet.

I continue to love these units. Originally, I had a problem remembering that my beds headboard light was on a smartplug, but eventually, that problem disappeared because I decided to make it a non-smart light. (It is now my power-failure security light, the only light I can turn on when the power fails, plugged into a UPS). I love being able to ask Alexa (my Echo device) to turn lights on and off while Im in bed. I have four of these units and two of their smart lightbulbs. I have * my bedroom ceiling (smartbulb) * living room ceiling (smartbulb) * my office recliner (smart plug) which has a second normal light. * bathroom hanging light (smart plug) * christmas tree (smart plug) which will go back to controlling a different light in January) * security camera (smart plug) Two of the lights I have set to random on-and-off times so that when Im not home, the lights are going on and off. Unfortunately, the random vacation mode does not appear to be a choice for the lightbulbs) but I have them on a fixed schedule. Finally, I also have some of the lights grouped as Everything so I can turn a bunch of things off at once. That is a great feature. I can turn things on and off by group name or by item name, and all the names are things that I defined. When I do decide to use a smart plug in a different place, its easy to rename it on my smartphone, then Alexa figures it out without my having to tell her anything. I love these units, especially the fact that I dont need to have a special controller to use them, and I dont have to use contorted commands, like Alexa ask whatever to do whatever that is required by some remote control devices. (I dont use another device that requires such contortion).

Works as advertised. Set up was easy and painless. Usage is pretty straightforward. I do like that I can use Google Assistant with it, too. Being able to tell Google Assistant to turn on the porch/garage light without having to touch my phone as I drive up to the house or to say turn everything off when going to bed is super convenient. That said, I do have a few gripes: 1. The plug is rather large and will block the other outlet in a duplex outlet. I guess the solution is to get the (slightly_more_expensive) mini version of this. 2. These can only be controlled via mobile app. A desktop app or browser plugin would be great. 3. (Android) The app widget takes up a 4x2 space and contains 4 *scenes. While you can resize the widget to be bigger (as big as the screen, if you wish), theres really no point because it doesnt add more scenes despite the extra space. Its limited to 4. No more, no less. This makes no sense. For me, I only really need one scene and currently theres no way to make the widget smaller with less than 4 scenes. 4. Scenes cannot enable an auto-timer (or, for smart bulbs, do complex behaviors such as scrolling through bulb colors. A sleep timer that ends with a gradual dimming would be amazing). You also cannot schedule scenes, if you want scheduling, you need to do it for each plug/bulb individually. Gripes aside, Im actually very pleased with the line of TP-Links smart products. I just hope Ill see issues 2-4 mentioned above resolved in a future update. *Scenes are programmable switches that can turn on/off TP-Link Smart Plugs and/or TP-Link Smart Bulbs for particular situations. For example, if you come home at night, you can have a scene to turn on your garage and patio lights, dim the lights (eg: 15%) for watching a movie, or just turn everything off when you go to bed. You can do any combination of plugs or bulbs. Scenes for smart plugs are limited to on/off actions only. Scenes for smart bulbs can do on/off and brightness level/color temp/color (depending on your bulb model).

I sincerely regret the heavy investment I made in these (Tp-Link/Kasa) devices. Ive bought a LOT of the wall switches, smart plugs (both with and without energy monitoring) and lightbulbs (both white and color). I am so bloody sick and f****** tired of the steaming pile of dog poo AKA Alexa. Alexa NEVER works, is always going offline, showing the red ring of death while yapping that something is wrong. And its NOT my Wifi, I have THREE AeroHive AP250 mesh WAPs (very high power enterprise class device) covering a two story home of 1,200sqt per floor which is massive, massive overkill. So its NOT my Wifi, at all. Anyway, Alexa is complete and utter GARBAGE and is 100% unreliable. The only thing you can be sure of with Alexa is that it never works. I hate and despise Alexa with a raging passion like nothing ever before in all my 60 years on this rotten rock. Im just about two more “Sorry, I’m having trouble understanding right now. Please try a little later” blathering from taking a hammer to every freaking one of them in my house. I am permanently disabled and wheelchair dependent, I got these things to assist me, supposedly to make my life a little better. Theyve done nothing of the kind. A consequence of Alexa never working is that all these nifty Kasa devices dont work either, when I need them to! Alexa is garbage. Im so done with it. Im now at the point where I need to abandon Alexa and my dependency upon it and replace it with Homekit/Siri. I keep my iPhone attached to me at all times, specifically for fall detection. Siri responds when I request it but it can not control the Kasa app or the Tp-Link devices in my home. The other annoyance is that there is no local control ability at all. I tried hard to find some sort of like, wireless remote that will control things purely by local control, for like when Alexa isnt working, which is 1000 times a day! Im so bloody mad that I spent so much money on all this junk and it ends up being almost worthless to me. I think maybe Ill sell it all and replace everything with bluetooth controlled switches so that its never dependent upon a remote server or connecting to the outside world at all. Let me be clear, my complaint is that these things are locked in to Alexa, Siri isnt allowed access and Alexa is extreme garbage. With Alexa always broken these devices dont work. OPEN THEM UP TO HOMEKIT/SIRI !!!!!!!1 I wish I could send it all back for a refund but its waaaay past that time and Im to deeply invested in it to just trash it without an immediate, drop in replacement system. Bottom line, IF I had a way to do it all over again, I wouldnt even go down this path at all. There must be better ways than this.

I got this as part of the Black Friday promo for purchasing an Echo Dot. Like the other TP-Link products I have purchased, the set-up is pretty easy from the TP-Link Kasa app. I think some people might get stuck when they attempt to connect to their own wi-fi network. For what ever reason, I notice that the TP-Link products always list my neighbors network first instead of mine. I solved that by clicking the option below the listed network to find my own. As for the product I have had no problems connecting or loss of signal. My plug is on the second floor of my home about twenty feet in distance from the wi-fi router. Not bad considering all the flooring and walls. My only complaint is that the smart plug covers the entire outlet. Not a problem for the room I am using as it only had one lamp running to that wall outlet. All the same, I cannot plug anything else into that wall outlet. My suggestion is that you might want to use this smart plug for a single appliance like a fan or Christmas lights. If you want to have smart features for a lamp, I would suggest purchasing a smart light bulb (see my review for the TP-Link Smart Wi-Fi Light Switch HS200) which is likely to have more features and allow you to keep full access to your wall outlet.

I was very impressed with this product. I have written very few reviews of products but I felt compelled to relate my experience. Setup was incredibly easy. Download the app, go through the very simple instructions there. 15 minutes after opening the box it was working perfectly. I used the timer feature several times and it worked great. I have it set to turn on every weeknight at the same time, and so far (last night), that worked as well. I love that it stores all schedules, network information, and away mode setup directly on the device, so even if the app is not running, or you even move the plug to a different outlet, all your settings will be maintained. Away mode lets you set up certain times (including the possibility of sunset to sunrise or vice versa) where the plug will turn on and off randomly, so if a light (or TV) is attached to the plug and it is visible from a window, it will look like someone is home. Havent used this yet, but it looks like a great feature. I just set this up yesterday, so I dont have a lot of experience with it yet, but so far it has worked perfectly. The only downsides I have found so far, is that the plug is a little bulky, although its not really a problem (If you have it plugged into the top plug in a normal 2 plug outlet, it wont block the bottom plug). Also, if you are trying to trigger the plug from the app while you are not on the same network as the plug, it might take as long as 10 seconds the very first time. Every subsequent press of the power button will be nearly instantaneous. If you are connected to the same network, there are no delays.

In my opinion, critical thing here is these are UL certified which is important if you dont want to burn your house down if trying to use with high-current device. I have a space heater in my home office which is in a kinda remote place in my house and I wanted to control it from google home. The heater has 1500 watt capacity which at 120 volts is in the neighborhood of ~12 amps (more to that calculation than I know) so theres not a tremendous amount of wiggle room in order to stay a decent amount below capacity, which I prefer. The UL certification gives me a substantial amount of peace of mind over not being certified and that is why I chose to buy this socket over other ones. On top of all of that, TP-Link has been doing a tremendously good job at integrating all of their devices and improving their user interfaces in ways I havent seen their competitors do in my anecdotal experience. I just coincidentally have a TP-Link mesh wifi network for my house. If TP-Link didnt have a UL certified plug and a competitor did, I would have bought that. But it happened to be TP-Link too. If or when my TP-Link account becomes relevant, I already have it set up. 1 account, all devices, and they are for the (arguably) best consumer (vs prosumer) devices available for sale. Bought to go buy some stock...

The TP-Link Smart Plug is a good product. It works well, and was easy to set up. TP-Link smart plugs are also 100% compatible with Google Home (Yes, I know most here probably use Echo. It works with it too!) The only drawback of this product is its size. This thing is BULKY, and on a powerstrip will likely take up the space of two outlets. If you have the space to spare, not a big deal. If space is a concern Id say go with the TP-Link mini. Youll spend a little more, but the space saving will be worth it. Im using one on my air conditioner which is amazing! At home I can say Hey Google, turn on the air conditioner and she does it. Out of the home, I can use the TP-Link Kasa app on my phone to turn the unit on or off. OR I can set up an IFTTT action to turn the AC on when I am within a predefined radius of my home. Welcome to the future, and for the price? Holy cow! You need this in your life. Oh, one last thing. Dont make my mistake. I bought two of these. One was going to control my TV. Learned quick that turning off a smart tv and powering off a smart tv are two very different things. Basically, if I use the plug, I have to wait for my TV to reboot every time I turn it back on. Dont buy one of these for your television.