Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)
-
Prof. Leatha Ziemann I
> 3 dayI would upgrade the Easy to install rating from a two star to 4 star if they included one or two spare vibration silicone mounting pegs that can start to brake if you pull too hard. Its hard to fully snap fans on which a bear when mounting them to a case.
-
michael hinds
> 3 dayNoctua, I love you. You made a Sandy Bridge Xeon run like its on ice, even with the stock heat sink.
-
John
> 3 dayI pulled a little bit of a hack and installed this in my projector to replace its crazy loud fan. Im not certain that this fan is keeping it cool enough, but wow, its less than half the noise!
-
Desert Hiker
> 3 dayI am using other 120mm Noctura fans, and they are of good quality and run quietly forever. Quiet is the name of the game and Noctura does not disappoint. I purchased this 80mm fan based on past and present experience. I added it to my homebrew desktop computer specifically to cool a NVME Samsung 980 solid state C-drive (also purchased from Amazon). The ultra quiet Noctura fan knocked 20 degrees Celsius off the NVME. The fan comes with mounting gear, but I used plastic ties to position it for maximum cooling. This was installed at least 15 months ago, and all is still good. My rig only uses Noctura. Yes, highly recommend.
-
Remi
Greater than one weekBest fan in the business. Quiet cooling at its best.
-
Vanessa
> 3 dayworks great!
-
Good Buyer
> 3 dayWorks well and is quitet
-
Paul W.
> 3 dayIt hasnt died or started squeaking, chirping or making any unusual noise. It runs relatively quiet for the expected amount of airflow. It does have onboard RPM sensors. Made a little bit of electrical interference noise running PWM, but works fine in DC. Chocolate Brown and Beige doesnt exactly match the black PCB and interior of my case, but may look right at home in your 80s performance build with a 5.5 Floppy. It does the job.
-
Thomas J.
> 3 dayThe fans are perfect for small rack mount servers.
-
Jack A. Vanarsdall
> 3 dayall is well
The NF-A8 is a highly optimised, premium quality quiet 80mm fan. Featuring Noctua’s AAO (Advanced Acoustic Optimisation) frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A8 further improves the renowned quiet cooling performance of the award-winning NF-R8. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 2200 to 1750rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
Flow Acceleration ChannelsThe NF-A8 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. |
SSO2 bearingThe NF-A8 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
Integrated anti-vibration padsIntegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems. |
Scope of delivery
|
Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NF-A8 PWM | NF-A8 FLX | NF-A8 ULN | NF-A8 5V PWM | NF-A8 5V | NF-A8 PWM chromax.black.swap | |
| Connector | 4-pin PWM | 3-pin | 3-pin | 4-pin PWM | 3-pin | 4-pin PWM |
| Voltage | 12V | 12V | 12V | 5V | 5V | 12V |
| RPM | Max: 2200 / Min: 450 | 2000 | 1400 | Max: 2200 / Min: 450 | 2200 | Max: 2200 / Min: 450 |
| RPM with L.N.A. | 1750 | 1650 | 1100 | - | - | - |
| RPM with U.L.N.A. | - | 1200 | - | - | - | - |
| Acoustical Noise | 17,7 dB(A) | 16,1 dB(A) | 10,4 dB(A) | 17,7 dB(A) | 17,7 dB(A) | 17,7 dB(A) |
| Acoustical Noise with L.N.A. | 13,8 dB(A) | 12,9 dB(A) | 6,5 dB(A) | - | - | - |
| Acoustical Noise with U.L.N.A. | - | 7,9 dB(A) | - | - | - | - |
| Size | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige | Black with swappable coloured anti-vibration pads |
