Noctua NH-U12S, Premium CPU Cooler with NF-F12 120mm Fan (Brown)
-
Oksana Rasulova
> 24 hourAmazing performance, best cpu fan i ever see
-
Dr. Darby Wolff Sr.
> 24 hourGreat thin cooler, it does keep my Intel i5 under 50C when doing stress test over an hour with ~30% fan speed.
-
Johann Garde
> 24 hourPassage dun Watercooling Antec Kuhler 920 ( bruyant, peu performant, ... ) au NOCTUA.
-
JC
> 24 hourFor some reason. I tried to install this on the mounting brackets that were correctly screwed into my motherboard. I tried for 2.5 hours but I could not for the life of me get the mounting screws on either side of the cooler to thread properly with their mounting slots on the mounting brackets so I gave up and went with the AMD stock cooler instead. Very disappointed in this product.
-
Aric Marks
> 24 hourIch bin sehr zufrieden mit dem Noctua NH-U12S. Ich habe einen Intel Core i7-9700KF Prozessor - also habe ich einen zweiten NF-F12 120mm Lüfter auf der Rückseite hinzugefügt. Die Temperatur beträgt 30-35 Grad. Die Spiele sind 40-45 Grad. Gewicht 580 g plus zweiter Lüfter. Meine Meinung ist die beste bis zu 200 TDP. Fast unhörbar bei der Arbeit. Ich rate allen.
-
Conrad Little
> 24 hourOttimo dissipatore, si parla di una marca molto buona e non delude
-
Vow
> 24 hourCe nest pas mon premier achat de ventirad Noctua, et ça ne sera pas le dernier.
-
Turano
> 24 hourThe best fan on the market.
-
luchetto
> 24 hourHo abbassato mediamente 12/15 gradi sul mio R5 3600 rispetto al dissi stock. Era il primo dissi che montavo e devo dire che è stato proprio semplice, corredato da ottime istruzioni e anche da pasta termica. Prodotto TOP
-
Jared Moore
> 24 hourBy far the most efficient air cooler I’ve owned. Six months in and keeping my R5 2600 at 24.3 degrees at idle, never gets above 50 under heaving gaming in AAA titles at 2k/144 fps with a 2070s GPU, and that’s jn an H510 case from NZXT! Performance may even be better in a more thermal friendly case. Considering my build is on a micro ATX build, mileage may vary on the installation difficulty.
The NH-U12S is the latest 12cm model of Noctua’s classic U-series single tower CPU coolers, which have received more than 400 awards and recommendations from the international press. The S-version’s 45mm slim shape ensures 100% compatibility with tall RAM modules and at the same time, its fine-tuned design and the class-leading NF-F12 FocusedFlow fan with PWM support for fully automatic speed control allow it to further improve its predecessor’s renowned quiet cooling performance. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-U12S is a complete premium quality solution that combines outstanding performance, quiet operation and excellent compatibility.
|
|
|
|
|
|---|---|---|---|
Classic 120mm tower size for excellent overall compatibilityStanding 158mm tall, the NH-U12S is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top PCIe slot on standard ATX or Micro-ATX motherboards, ensuring optimum compatibility with multi-GPU setups. |
100% RAM compatibilityThanks to its slim design with only 45mm fin depth, the NH-U12S will not overhang the RAM slots even with two fans installed. This gives the user full access to the memory modules on all current CPU sockets and ensures 100% compatibility with tall heatspreaders or optional memory fans. |
NF-F12 120mm Focused Flow fanRecommended by more than 150 hardware publications and thousands of enthusiasts world-wide, the Noctua"s premium quality NF-F12 Focused Flow 120mm fan is renowned to combine superb static pressure, excellent heatsink performance and surprising quietness of operation. |
NT-H1 thermal compoundHaving received more than 100 awards and recommendations from hardware journalists around the world, Noctua"s NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. |
Measurements
- Height (without fan): 158 mm
- Width (without fan): 125 mm
- Depth (without fan): 45 mm
- Height (with fan): 158 mm
- Width (with fan): 125 mm
- Depth (with fan): 71 mm
- Weight (without fan): 580 g
- Weight (with fan/s): 755 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- NF-F12 PWM premium fan
- NA-RC6 Low-Noise Adaptor (L.N.A)
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Anti-vibration pads and fan-clips for second NF-F12
- Noctua metal case-badge
Fan compatibility
120x120x25
Anti-vibration pads and fan-clips for second NF-F12 (optional)
For users who want to achieve even better performance by adding a second, optional NF-F12 fan to create a push/pull setup, the NH-U12S includes fan clips and an extra set of custom-designed anti-vibration pads that allow to off-set the rear fan by 5mm to improve acoustics in dual-fan mode.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NH-U12S | NH-U12S TR4-SP3 | NH-U12S DX-4189 | NH-U12S redux | NH-U12S chromax.black | NH-U12A | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | X | X | ✓ | ✓ | ✓ |
| LGA1700 | ✓ | X | X | ✓ | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | X | X | ✓ | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | X | X | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X | X |
| Xeon LGA4189 | X | with NM-i4189 | ✓ | X | X | X |
| AM5 | ✓ | X | X | ✓ | ✓ | ✓ |
| AM4 | ✓ | X | X | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | ✓ | X | X | X | X |
Related products
