OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Stuart T
> 3 dayGreat solution to my taped to the frame loose hanging SSD as purchased from previous owner. Blue color is neat, reminds me of R2D2 having alternate color panels.
-
Abagail Kerluke
> 3 dayVery nice rack mounting gos well with my good old mac
-
ACMMD
Greater than one weekWell, you install a SDD into this wonderful adaptor and then you can plug it into your eauqlly wonderful Mac Pro. I mean, what more can you say? Its a pece of alumnum that looks and works fine.
-
Frank C. Okusako
> 3 dayI like the simplicity of this device. Really easy to put together. Nice fit, too.
-
Barona
> 3 dayUnlike Mac Pro tray adaptors, this replacement tray allows a direct connection between the SSD and internal SATA port. There is no intermediate socket, nothing to break or get flakey. Just a nice solid piece of kit. Not the cheapest, but the simplest and most robust SSD tray for 4,1 and 5,1 Mac Pros.
-
SAK
> 3 dayWorks Great!
-
Johnny Mac
> 3 dayWell made, they appear to be a casting but still very rigid and they fir the MacPro perfectly. I used one to put a Hynix Gold SSD boot drive in one of my older Mac Pros I use for an old simulator box. Big improvement! These blue trays are a bit pricey like most OWC stuff, but everything aligns well with no problems. If you are installing quality parts, these are a nice bit to finish off your project.
-
PEMarston Films
> 3 dayWorks great!
-
JohnH
Greater than one weeksuper fast and easy install, makes adding a ssd to s 2008-2013 mac pro a snap!
-
Smiley
> 3 dayAs described, this was what I needed for my 1tb ssd hard drive to fit into my mac pro 5.1.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
