OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Joe Brown
Greater than one weekPerfect fit
-
FR Gough
> 3 dayExcellent quality, perfect fit, fast delivery. Worked beautifully to let me swap out a spinning hard drive with an SSD in my 2010 Mac Pro.
-
bcoverss
> 3 dayVery high quality.
-
Todd Roberts
> 3 dayThe sled works perfectly and the color helps identify it from other drives.
-
Nemo
Greater than one weekWorks perfect on macpro 2012 I have to for ssds everthing lines up without issue o/
-
CityStreetz
15-12-2024Works as intended.
-
Alejandro Arróspide
> 3 dayOWC siempre fabrica cosas de buena calidad y este soporte cumple con las necesidades al 100%
-
D. W. Francis
> 3 dayThe only potential drawback is the color. In all other respects; fit, finish and functionality, it’s very well done.
-
Hassan ali
> 3 dayit didi not fit well as it is long and its not really fit inside the mac pro case box .
-
Tallman
Greater than one week2010-2012 Mac Pro computers can run Sierra and High Sierra quite nicely with the read/write speed boost of an SSD. Add a compatible graphics card (Radeon RX 580) and Mojave is an option. The OWC 2.5” sled is the easiest way to go.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
